1993z32

My recent re-tune @ Advanced Engine Dynamix in Orange, Ca.

196,000 miles on the stock 1.6L longblock
91 Octane
Begi "T25/28 Hybrid" @ ~14.5psi
MS2PnP
Begi Cast manifold + downpipe
2.5" Catless

(Red graph was 10 months ago, untuned @ 10psi)

JasonC SBB

Does that dyno have the "Church Automotive" calibration?

Savington

iTrader: (31)

It's an SAE Dynojet, so no.

Braineack

iTrader: (62)

I'd be happy with that. just wish it spooled like a 1.8L.

1993z32

I have yet to drive a turbo 1.8... but I have the feeling I'll want to swap if I do. I'm guessing along with the bigger lung capacity the 1.8L head flows better as well? I have driven a friend's KA24 S13 with a GT2560R, it literally feels naturally aspirated compared to mine. I don't have an apples-to-apples comparison but I'm sure the 0.86 A/R on this turbo puts a damper on its spool-up.

Braineack

iTrader: (62)

take the plot from 3K to 4.5K and then move it 1000RPM to the left. that's how a 1.8L would look--with less boost to boot.

1993z32

My bank account does not approve of this post.

Savington

iTrader: (31)

Would have cost you around $600 to upgrade if you had done it before you started the turbo build. Hence the cadre of members here who implore people building 1.6 turbo cars to swap to a 1.8 early on.

1993z32

But, like many of the other people who turbo their 1.6L, it's my DD. I was able to turbo it without having more than 8 hours of downtime (at once) for the whole build. Didn't have to worry about transporting and engine, said engine being no good, etc. Are any of those things really that difficult to overcome? Not really. But it was just easier keeping my healthy 1.6L in there and seeing what she could do. There are a lot of 1.6T's running around, and still a big market for 1.6 specific turbo parts, for those simple reasons. Would I like a 1.8L in my car? Would I 1.8L swap if I did it again? YESS

longuyen88

iTrader: (7)

great numbers! I am having Toby do some work and tuning on my car also. Can't wait.