Welcome to Miata Turbo Forum - Turbo Kitten is watching you test compression.
Welcome to Miata Turbo Forum - Turbo Kitten is watching you test compression.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
OK ok i know i should just STFU and turbo the 99 and get off the fence of should I or should I not.
Here is the question especially since it seems that E manage is a hit and miss with some NB's but lets say I were to get a EMU and a PnP harness. What else would I need to buy with it. I've been going through the archives but it seems most of the information is for the EBM/G.
I would like it to be as PnP as I can get (like my old link was) so that I have cut/tap/splice nothing at all or as little as possible. I also need to have OBDII so that cuts out full standalone. (thank you Texas)
__________________
99 Emerald Mica Sports Package (R)-Former SCCA C-stock champion, revalved bilsteins, 550/350gc, 01 header, 15x8 6ul, polybushings 92 Classic Red Turbo-"Sold" 93 Ford Escort Lx- "Sold" traded in on the 92 miata
greddy pressure sensor is needed for optimal tunning, if you are not serious about getting it to run right than you can do without it too.
Wideband-> LC1 works well and is easy to install
PnP harness http://www.boomslang.us/ultimate.htm made by boomslang
you are ready to go.
EMU + PnP harness (99)
