rockdoc

How many of you guys with a 1.6 have used/fitted a EMB using a boomslang harness?
Was it 100% pnp?- if not which wiring did ya have to alter?


Reason i,m asking is i have recently been trying to fit a EMB to a 1991 1.6- but with issues (ie not pnp- had to snip TPS wire, cant see rpm/duty cycle on emb support tool)

Ive tried x2 stock ECU,s which work in other miata,s /mx5,s, and x2 EMB ,s that work in other miata,s /mx5,s and the problem only arises when i introduce the boomslang into the equation.

Anyone had these issues - or is the harness possibly faulty!

musanovic

iTrader: (2)

i have a bloomslang harness for a NB and it works fine on a EMU.

mikeflys1

iTrader: (2)

Yea mine too....except for having to cut the crank pos./cam pos./knock sensor wires

Falk

iTrader: (1)

There was a issue with the TPS connection
if I remember correct.
They had it on wrong pin.
But I was told, they solved this meanwhile.

Falk

rockdoc

Thanks for the info
Was told by boomslang that i was the first person to have had any problems!

yeah right.