ihiryu

Hey guys, I've been scouring the net for an ECU diagram for my car.

I'm trying to wire up my ARK MFD (multi function display), and am needing a few pins off the ECU.

Everything I've found here, and M-S all lead to dead links, I was hoping someone had it available here.

I need pin locations for: Ign power, RPM signal,Water Temp, TPS signal, and VSS if possible.

Thanks!

bahurd

iTrader: (8)

You don't say year of car...

The 2004 wiring diagram shows the turbo controls as part of the 'generic' layout so I assume the pinout for the MSM is the same as the normal car. At least the 2004 is...

ihiryu

Hey thanks, that's what I need. Seems like people tap for the tach signal in the actual diagnostic box though. I wonder if it would be easier to tap all the connections in the engine bay, since I'm routing a wire to the diagnostic box.

bahurd

iTrader: (8)

Isn't all of it available via the ODBII port which, according to the ARK page the MFD2 is capable of reading?

Google will be a big help to you.

ihiryu

Right on,

No, unfortunately, mine is the older version of the MFD that doesn't support OBD II