Tanabe wideband with stock ecu?
08-29-2015, 09:12 PM
#1
Newb
Thread Starter
Join Date: Jul 2015
Location: Ottumwa, IA
Posts: 12
Total Cats: 0
Tanabe wideband with stock ecu?
Just bought a tanabe wideband and afr gauge, and was wondering if it will work with the stock ecu. I know some widebands can be used with stock ecu but cant find anything about tanabe. Thanks in advance.
Reply
0
0
08-31-2015, 06:28 AM
#4
Junior Member
Join Date: Mar 2012
Posts: 110
Total Cats: 13
I have an LC2, which has configurable outputs. This means you can feed a stock ECU by simulating a stock narrowband. I had mine set up so 14:1 = 1.1v and 15:1 = 0.1v. See if yours has a programmable output on it.
Last edited by sparkybean; 08-31-2015 at 06:29 AM. Reason: spell
Reply
0
0
08-31-2015, 10:16 AM
#5
I think you're going to have a hard time with that. I hadn't even heard of this wideband before this thread. Nobody here uses one.
I'd suggest selling it to someone that values jdm y0 over support and function and get an MTX-L if you really need narrowband simulation.
I'd suggest selling it to someone that values jdm y0 over support and function and get an MTX-L if you really need narrowband simulation.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
