90 Turbo

iTrader: (3)

Well like the title says. I bought a 2.5mm to serial cable but it will get stuck on loading tables from controler and will not load base map to vvt tuner. I am not sure I hooked up every thing right and wanted to see that the vvtuner was seeing rpm so it could work properly and I wired the sensors (crank and cam sensor) and am not using them for stock timing so anyway any suggestions.
I check ports and have choose right port 2.
I emailed the diy people but no responce.

Reverant

iTrader: (10)

1) Make sure both grounds are connected properly
2) Make sure that the LED is on
3) The software does freeze on connection sometimes here too, but its no persistant. If you try a couple of time, it will connect eventually.

Matt Cramer

PM me with your email address and I'll see what happened to your email.

90 Turbo

iTrader: (3)

Well I am pretty sure the vvtuner is not working. I disconected the vvt at the valve cover and took it for a drive no noticable difference.