1.6 Solid Lifters - Valve clearances
03-15-2013, 03:05 PM
#1
Newb
Thread Starter
Join Date: Mar 2009
Location: Birmingham,England
Posts: 43
Total Cats: 0
1.6 Solid Lifters - Valve clearances
Im fitting solid shim under bucket lifters to my '92 1.6 engine. I just wondered what the valve clearances should be?
I did find the clearance specs for an NB 1.8 engine, would these be suitable for my 1.6?
IN: 0.18—0.24 mm {0.008—0.009 in}
(0.21±0.03 mm {0.008±0.0012 in})
EX: 0.28—0.34 mm {0.012—0.013 in}
(0.31±0.03 mm {0.012±0.0012 in})
If not, could someone point me in the right direction for the specs?
Thanks
Mike
I did find the clearance specs for an NB 1.8 engine, would these be suitable for my 1.6?
IN: 0.18—0.24 mm {0.008—0.009 in}
(0.21±0.03 mm {0.008±0.0012 in})
EX: 0.28—0.34 mm {0.012—0.013 in}
(0.31±0.03 mm {0.012±0.0012 in})
If not, could someone point me in the right direction for the specs?
Thanks
Mike
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
