How does your built motor sound when it is cold?
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
How does your built motor sound when it is cold?
How does your built motor sound when it is cold, before it warms up?
I need data data data. Please also post your motor build if it is not in your signature.
Mine squeaks. And taps a bit.
ALSO POST THE AMBIENT COLD TEMPERATURE. 20F is different from balmy 65F
I need data data data. Please also post your motor build if it is not in your signature.
Mine squeaks. And taps a bit.
ALSO POST THE AMBIENT COLD TEMPERATURE. 20F is different from balmy 65F
Last edited by Faeflora; 11-10-2010 at 12:35 AM.
#9
http://www.youtube.com/watch?v=G24unfFNa6o
halfway between cold and hot, but the sound does not change much..
halfway between cold and hot, but the sound does not change much..
#12
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,646
Total Cats: 3,009
Mine sounds like an industrial grinder making small gravel out of large gravel. I thought it was normal for Miatas...
Stock 1.8 block, 120k mi.
j/k I have a little piston slap when it is cold, but that goes away when it begins to warm. It goes clickety clickety cold or warm just due to loose tolerances from wear. I'm sure the PO's didn't keep the oil refreshed as they should have. No biggie.
Stock 1.8 block, 120k mi.
j/k I have a little piston slap when it is cold, but that goes away when it begins to warm. It goes clickety clickety cold or warm just due to loose tolerances from wear. I'm sure the PO's didn't keep the oil refreshed as they should have. No biggie.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM