OEM Cam Gears
02-05-2012, 08:20 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Guildford, UK
Posts: 163
Total Cats: 0
OEM Cam Gears
After reading a rather muddled and vague thread on m.net about using OEM cam gears with the exhintake mod, I decided to take some empirical measurements and do some calculations.
On the Mk1 gears, the E slot appears to be as close as to 122.5º, whereas the Mk2 is 123º. Any one else measured them?
I used a DTI and rotary table mounted on a mill.
My calculations show you can get some adjustment by using different slots and numbers of teeth.
On the Mk1 gears, the E slot appears to be as close as to 122.5º, whereas the Mk2 is 123º. Any one else measured them?
I used a DTI and rotary table mounted on a mill.
My calculations show you can get some adjustment by using different slots and numbers of teeth.
Reply
0
0
01-27-2015, 10:29 AM
#3
Newb
Join Date: Jan 2015
Posts: 1
Total Cats: 0
Holy Crap! Freaky Roadster, Thank You! I have been looking for something like the info in this spreadsheet for days. You just, well two and a half years ago, made my life a ton easier. Now, to decide whether I would do better powerwise to go with I+25 for 195.6 or E+10 for 200.7 degrees. Does anyone who has tuned an exhintake with cam gears have any input? on the final degree setting of the exhintake cam? I should probably mention that I have a 94
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
