Engine Performance This section is for discussion on all engine building related questions.
Sponsored by:
Sponsored by: KPower

Where is all my oil going?

Thread Tools
 
Search this Thread
 
Old 04-23-2015, 09:10 PM
  #1  
Senior Member
Thread Starter
iTrader: (1)
 
gorillazfan1023's Avatar
 
Join Date: May 2010
Location: Harrisburg, Pa
Posts: 581
Total Cats: 8
Default Where is all my oil going?

So my turbo miata seems to have a massive oil addiction. Compression has always come back good but I was using like 2 quarts every 700 miles or less. My mechanic lent me his leak-down tester and I got terrible results, however I was wary that I wasn't using it properly so I had him check it as well. He said it was the best engine he's ever tested, less then 5% on all cylinders.

This leads me to my question, where is all my oil going? I have some seals that weep but I don't leak enough to leave puddles on the ground. Intercooler pipes are dry and the turbine outlet is also dry.

Am I missing something dumb? The car is all stock now (yearly inspection) and I plan to put some miles on it and see if the consumption is the same without the turbo.

The car smokes a lot with the turbo on as well. I think I have a rebuild kit laying around so I might put that on just because.

Any help would or ideas would be appreciated.

Thanks,
Patrick
gorillazfan1023 is offline  
Old 04-23-2015, 11:28 PM
  #2  
Senior Member
iTrader: (21)
 
bmxfuel007's Avatar
 
Join Date: Apr 2010
Location: Redmond, WA
Posts: 518
Total Cats: 19
Default

turbo seals probably dead. Are you running an oil restrictor?
bmxfuel007 is offline  
Old 04-24-2015, 01:33 AM
  #3  
Senior Member
iTrader: (8)
 
Twibs415's Avatar
 
Join Date: Feb 2011
Posts: 615
Total Cats: 112
Default

did you ever mess with the baffles in the valve cover?
Twibs415 is offline  
Old 04-25-2015, 09:34 PM
  #4  
Senior Member
Thread Starter
iTrader: (1)
 
gorillazfan1023's Avatar
 
Join Date: May 2010
Location: Harrisburg, Pa
Posts: 581
Total Cats: 8
Default

I think I gave my oil restrictor away, I had read that journal bearings shouldn't really need a restrictor and I had intended to rebuild my turbo when I got it. I actually have two of the same center sections and I think I swapped to my non-rebuilt one because of another issue I was having (was unrelated).

I've been rather busy lately but I'll try and tear the turbo apart tomorrow and see what I can see.
gorillazfan1023 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
Aroundcorner
Miata parts for sale/trade
2
10-01-2015 03:20 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM



Quick Reply: Where is all my oil going?



All times are GMT -4. The time now is 05:21 AM.