k24madness

iTrader: (6)

I am getting ready to yank my stock motor and install one with forged internals. My goal of 300+whp seems realistic. Here is how I see it coming together. Input welcome

Supertech 9.5:1 or 10:1 Pistons
M tuned rods
Boundry pump
ATI damper
Shaved .060 and ported 99 head with +1mm valves
BP5a Intake cam and stock exhaust cam
Supertech single springs
Rotrex C30-74
E85, MSPNP and ID1000's
Honda skunk2 intake

With the ATI the blower will redline at 7,950. Based on all my fuzzy math over 300whp is possible.

viperormiata

iTrader: (24)

Based on your attention to detail and quality of work in your car I can only see glory coming from this thread.

Ryan_G

iTrader: (8)

If you're running E85 why not go with 10.5:1 or 11:1 unless you are attempting to be able to run pump gas if absolutely necessary.

Savington

iTrader: (31)

10:1 + .060 shave = way more than 10:1

Ryan_G

iTrader: (8)

I missed the shaved part in the original post... carry on

Mobius

iTrader: (2)

Exciting. I shall be watching with great interest.