Supertech pistons with dot on wrong side?
11-20-2014, 08:33 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Bay Area, CA
Posts: 811
Total Cats: 270
Supertech pistons with dot on wrong side?
The dot on the top of the piston should be towards the front of the motor right?
If so are my pistons marked incorrectly? Note the dot at the top of the picture and the larger valve reliefs on the EXHAUST side (if following the dot convention).
If so are my pistons marked incorrectly? Note the dot at the top of the picture and the larger valve reliefs on the EXHAUST side (if following the dot convention).
Reply
0
0
11-20-2014, 08:40 PM
#2
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
Hmm. I don't remember my pistons having a dot.
Looking back through pictures i see a very very small dot on the top of the piston but not where the dot on your piston is.
Looking back through pictures i see a very very small dot on the top of the piston but not where the dot on your piston is.
Reply
0
0
11-21-2014, 12:43 AM
#5
Elite Member
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,165
Total Cats: 855
Are you sure they're Supertechs? Maybe they're Wisecos?
My new ones (9:1) have the dots at the front. I don't recall if my old ones had dots or not, and the photos I have of them it's all covered in carbon.
--Ian
My new ones (9:1) have the dots at the front. I don't recall if my old ones had dots or not, and the photos I have of them it's all covered in carbon.
--Ian
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
