Engine Performance This section is for discussion on all engine building related questions.
Sponsored by:
Sponsored by: KPower

Clutch an 1.6er Turbo

Thread Tools
 
Search this Thread
 
Old 09-24-2009, 02:00 PM
  #1  
Junior Member
Thread Starter
 
xitsam's Avatar
 
Join Date: Jan 2007
Location: Austria
Posts: 121
Total Cats: 0
Default Clutch an 1.6er Turbo

What Clutch Types (Brands) are you using?
What are the best for long milages? it should not go bad after a few miles.

Thanks and i hope for a lot responce.
xitsam is offline  
Old 09-24-2009, 02:08 PM
  #2  
Senior Member
iTrader: (6)
 
tyson87's Avatar
 
Join Date: Aug 2008
Location: West Palm Beach, FL
Posts: 1,020
Total Cats: 1
Default

1.8 flywheel and ebay 1.8 F1 stage 2/3 clutch
/thread
tyson87 is offline  
Old 09-24-2009, 02:08 PM
  #3  
Former Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
Default

I have a policy against bashing noobs from foreign countries, but you are really pushing it.
Savington is offline  
Old 09-24-2009, 08:26 PM
  #4  
Elite Member
iTrader: (13)
 
Fireindc's Avatar
 
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,598
Total Cats: 561
Default

Act clutches are ftw.
Fireindc is offline  
Old 09-25-2009, 03:13 AM
  #5  
Junior Member
Thread Starter
 
xitsam's Avatar
 
Join Date: Jan 2007
Location: Austria
Posts: 121
Total Cats: 0
Default

Originally Posted by Savington
I have a policy against bashing noobs from foreign countries, but you are really pushing it.
Why, i just want to know what types are proven, without to spent many Euros for junk.
It can not every human on this wolrd be a fanatic mechanic who knowing all.. like you.

I hope here are more useful posts like tyson87 and Fireindc

Thanks in advance
xitsam is offline  
Old 09-25-2009, 04:41 AM
  #6  
Former Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
Default

Originally Posted by xitsam
Why, i just want to know what types are proven, without to spent many Euros for junk.
It can not every human on this wolrd be a fanatic mechanic who knowing all.. like you.
You must understand that I taught myself the ins and outs of this car by SEARCHING through forums just like this, and not asking the masses about every little question that I had. Do you think that we've never discussed clutches before on this forum?

Imagine you are invited to watch a card game. Poker, for instance. You're invited to play in your own small game of poker, and you have a huge rulebook and strategy guide available to you. It's a little daunting, but all the information is in there, and there's even a glossary to help you find some of the basic stuff. You also have the option of watching the best players in the game as they work out new strategies and improve both the game and their own play.

Are you going to sit down at that table and ask that they stop and teach you how to play? Are you really surprised that they get pissed off? They wrote the rulebook and strategy guide, they opened their gameplay up for your own observation, and you still want them to simply tell you?

It seems foreign to new members, but to those of us who have been around the block, it's frustrating and insulting.

If you've gotten this far, you deserve this info:
-The best clutch you can buy is an ACT, hands down
-The new FM Stage 1 and Stage 2 clutches are getting good reviews
-SPEC Stage 2s are absolute crap
-Clutchnet is hit or miss, there's a long thread about Braineack having some major issues with his

If you wise up and learn to utilize the resources at your disposal (the Useful Posts section, the FAQs, and the search function), you'll open your own door to the vast world of knowledge that this forum has to offer. If you expect us to spoon-feed that knowledge to you, we will kick you in the stomach and slam that door on your head.
Savington is offline  
Old 09-25-2009, 06:06 AM
  #7  
I'm a terrible person
iTrader: (19)
 
FRT_Fun's Avatar
 
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
Default

The FM Happy Meal setups are great. I have the FM Level 1 and it feels like stock and holds great with the mods I have.
FRT_Fun is offline  
Old 09-25-2009, 07:45 AM
  #8  
Senior Member
iTrader: (2)
 
therieldeal's Avatar
 
Join Date: Oct 2007
Location: Northeastern CT
Posts: 547
Total Cats: 2
Default

i ran an ACT HD/organic combo for quite a while and loved it... until i overpowered it and it started slipping.

i swapped the disc out for a spec 3+... it held awesome, but within 3k miles it had eaten away at my flywheel and pressure plate to the point where they can't be reused. it was still holding power and driving just fine like this, i'd never have noticed if i hadn't pulled the trans.
therieldeal is offline  
Old 09-25-2009, 09:26 AM
  #9  
Senior Member
iTrader: (9)
 
tasty danish's Avatar
 
Join Date: Sep 2009
Location: Yamato Japan
Posts: 691
Total Cats: 26
Default

Didn't install my clutch but P/O told me it has an ACT organic disk with XT pressure plate.

Best clutch I've ever used, it's amazing. Slips and is very well mannered but grabs HARD. Pedal is rather stiff but I prefer firm pedals. After my first couple hours driving the car I forgot about the pedal effort.
tasty danish is offline  
Old 09-25-2009, 09:40 AM
  #10  
Tour de Franzia
iTrader: (6)
 
hustler's Avatar
 
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Default

Put another shrimp on the barbie!!!
hustler is offline  
Old 09-25-2009, 10:04 AM
  #11  
Senior Member
iTrader: (1)
 
budget racer's Avatar
 
Join Date: Apr 2007
Location: North Jersey
Posts: 717
Total Cats: 0
Default

lmao!

you never cease to out-do yourself. thanks hustler.
budget racer is offline  
Old 09-25-2009, 01:29 PM
  #12  
Elite Member
 
spike's Avatar
 
Join Date: Jan 2005
Location: vancouver canada
Posts: 1,614
Total Cats: 0
Default

Originally Posted by hustler
Put another shrimp on the barbie!!!
Hustler,the person is from Austria,not Australia.
spike is offline  
Old 09-25-2009, 01:51 PM
  #13  
:(
iTrader: (7)
 
magnamx-5's Avatar
 
Join Date: Jul 2006
Location: nowhere
Posts: 8,255
Total Cats: 4
Default

Originally Posted by hustler
Put another shrimp on the barbie!!!
you ******* fail trey.

As for the original poster savington is right but your thread at least is well presented i suggest you take the suggestions you have and run with them doing your own further research. So that in the end you will be a knowledgable consumer happy with there product.
magnamx-5 is offline  
Old 09-25-2009, 02:12 PM
  #14  
Junior Member
Thread Starter
 
xitsam's Avatar
 
Join Date: Jan 2007
Location: Austria
Posts: 121
Total Cats: 0
Default

Ok, just for formal:

Áll guys who fuckt up, when i ask some questions..
As a no english speaking person is it not very funny to search in a english forum like this, there are to many technical english than i understand, so it is very hard to find useful answers, maybe you can go on a german forum and search for something, you will see... 10000 hits an no result that match.

That is the reason why "noobs" asking.. and remember you was also a noob at the beginning.

But thank you anyway to open my eys...

And thank you to all other guys who sharing here experience with me and all other Noobs here on this Planet.


Originally Posted by Savington
You must understand that I taught myself the ins and outs of this car by SEARCHING through forums just like this, and not asking the masses about every little question that I had. Do you think that we've never discussed clutches before on this forum?

Imagine you are invited to watch a card game. Poker, for instance. You're invited to play in your own small game of poker, and you have a huge rulebook and strategy guide available to you. It's a little daunting, but all the information is in there, and there's even a glossary to help you find some of the basic stuff. You also have the option of watching the best players in the game as they work out new strategies and improve both the game and their own play.

Are you going to sit down at that table and ask that they stop and teach you how to play? Are you really surprised that they get pissed off? They wrote the rulebook and strategy guide, they opened their gameplay up for your own observation, and you still want them to simply tell you?

It seems foreign to new members, but to those of us who have been around the block, it's frustrating and insulting.

If you've gotten this far, you deserve this info:
-The best clutch you can buy is an ACT, hands down
-The new FM Stage 1 and Stage 2 clutches are getting good reviews
-SPEC Stage 2s are absolute crap
-Clutchnet is hit or miss, there's a long thread about Braineack having some major issues with his

If you wise up and learn to utilize the resources at your disposal (the Useful Posts section, the FAQs, and the search function), you'll open your own door to the vast world of knowledge that this forum has to offer. If you expect us to spoon-feed that knowledge to you, we will kick you in the stomach and slam that door on your head.
xitsam is offline  
Old 09-25-2009, 02:14 PM
  #15  
Junior Member
Thread Starter
 
xitsam's Avatar
 
Join Date: Jan 2007
Location: Austria
Posts: 121
Total Cats: 0
Default

Originally Posted by hustler
Put another shrimp on the barbie!!!
Sorry?

Last edited by xitsam; 09-25-2009 at 02:36 PM.
xitsam is offline  
Old 09-25-2009, 02:30 PM
  #16  
Senior Member
 
Miatamaniac92's Avatar
 
Join Date: Nov 2005
Location: Austin, TX yall
Posts: 846
Total Cats: 0
Default

Get the flywheel weight-ring machined down and balanced instead of buying a lightweight unit.

Chris
Miatamaniac92 is offline  
Old 09-25-2009, 02:41 PM
  #17  
Senior Member
iTrader: (1)
 
ArtieParty's Avatar
 
Join Date: Sep 2007
Location: Trenton, NJ
Posts: 1,118
Total Cats: 0
Default

Originally Posted by magnamx-5
you ******* fail trey.
Seriously? He didn't fail. It's from Dumb and Dumber.
ArtieParty is offline  
Old 09-25-2009, 02:42 PM
  #18  
Junior Member
Thread Starter
 
xitsam's Avatar
 
Join Date: Jan 2007
Location: Austria
Posts: 121
Total Cats: 0
Default

A Friend of me just installed a ACT Xtreme (Stage 2) on a lightet 1.8 Flywheel he has the FM Stage 2 Kit installed, i have currently the Stock 1.6er Clutch on and it slips after a few "Miles" with Setup see signature (but i dont know how much horses (ponys) are under the hood.

I think i will try the FM Stage 2 Clutch Kit, becouse FM has the most feedback an knowledge about Turbo Miatas.
xitsam is offline  
Old 09-26-2009, 12:16 AM
  #19  
:(
iTrader: (7)
 
magnamx-5's Avatar
 
Join Date: Jul 2006
Location: nowhere
Posts: 8,255
Total Cats: 4
Default

Originally Posted by xitsam
A Friend of me just installed a ACT Xtreme (Stage 2) on a lightet 1.8 Flywheel he has the FM Stage 2 Kit installed, i have currently the Stock 1.6er Clutch on and it slips after a few "Miles" with Setup see signature (but i dont know how much horses (ponys) are under the hood.

I think i will try the FM Stage 2 Clutch Kit, becouse FM has the most feedback an knowledge about Turbo Miatas.
Ok well the ebay stage 3 linked from your local ebay
F1 RACING STAGE 3 CLUTCH KIT 90 91 92 93 MX5 MIATA 1.6L:eBay Motors (item 350239752683 end time Oct-12-09 11:36:20 PDT)
wil work for you as will a act hd. No need to spend the money on a XT as your little 15g will not meat the potential of that clutch. The FM offering will be aproximatly 300 dollars plus international shipping where as the clutch i linked is local and only 140 euros. Wich is still a markup from what we see in the US market but quite affordable in my book. If you speak german plenty of us can help you in that language as well. And we might have some that speak other languages, french etc. Shrieb mir mall diene fragen wen die her kommen. Bis spater
magnamx-5 is offline  
Old 09-26-2009, 08:48 AM
  #20  
Elite Member
iTrader: (51)
 
gospeed81's Avatar
 
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Default

Originally Posted by Savington
You must understand that I taught myself the ins and outs of this car by SEARCHING through forums just like this, and not asking the masses about every little question that I had. Do you think that we've never discussed clutches before on this forum?

Imagine you are invited to watch a card game. Poker, for instance. You're invited to play in your own small game of poker, and you have a huge rulebook and strategy guide available to you. It's a little daunting, but all the information is in there, and there's even a glossary to help you find some of the basic stuff. You also have the option of watching the best players in the game as they work out new strategies and improve both the game and their own play.

Are you going to sit down at that table and ask that they stop and teach you how to play? Are you really surprised that they get pissed off? They wrote the rulebook and strategy guide, they opened their gameplay up for your own observation, and you still want them to simply tell you?

It seems foreign to new members, but to those of us who have been around the block, it's frustrating and insulting.

If you wise up and learn to utilize the resources at your disposal (the Useful Posts section, the FAQs, and the search function), you'll open your own door to the vast world of knowledge that this forum has to offer. If you expect us to spoon-feed that knowledge to you, we will kick you in the stomach and slam that door on your head.
I want to make dirty, dirty love to this post.


Originally Posted by Savington


-The best clutch you can buy is an ACT, hands down
+1

Get an ACT Xtreme and never look back.

These are made for both 1.6L and 1.8L flywheels...and hold up to a LOT of abuse.

DO put good bearings in there when swapping (pilot and throwout).
DO be ready to replace clutch slave cylinder and possibly clutch master cylinder as the slightly higher ACT pressure plate resistance will put some strain on old rubber seals.


This clutch engages EXACTLY like an OEM clutch...at the price of slightly higher pedal effort.

To me this is better than an OEM faggy-soft pedal with a light-switch engagement 6 puck disc.

Last edited by gospeed81; 09-26-2009 at 09:11 AM.
gospeed81 is offline  


Quick Reply: Clutch an 1.6er Turbo



All times are GMT -4. The time now is 05:10 AM.