hustler

iTrader: (6)

I can't see the pic and I'd like to facebook ----- this thing.

soviet

iTrader: (10)

Hahaha the domain I use sometimes gets flagged as spam. Thanks 1&1.

Here's the same image from my own domain -
http://gaiazov.com/photo/mt.net/DSC_0710.jpg

please spread the joy.

Faeflora

iTrader: (2)

And

I Haz turbo

Isnt retarded? And doesnt use internet pidgen?

U jus mad cus i get more hits than u

Braineack

iTrader: (62)

There's a time and place for memes. you bring this site down to a level only people from FL can understand.

sixshooter

iTrader: (12)

I can haz le dumb?

soviet

iTrader: (10)

A+++ read would read again
http://zilvia.net/f/chat/455518-efr-...c-failure.html

soviet

iTrader: (10)

Also this -
http://www.supraforums.com/forum/sho...nces-yet/page2

soviet

iTrader: (10)

And then this
http://www.skylinesaustralia.com/for...st__p__6113698



I'm guessing I'm one of the latter ones with this issue.

18psi

iTrader: (76)

I really do hope your replacement/exchange goes smooth and drama free.

Because 9 times out of 10 it doesn't

soviet

iTrader: (10)

Right now the only thing I fear is waiting for months on a new turbo due to supply issues. I don't think there will be issues with replacement considering the information I just dug up.

soviet

iTrader: (10)

The last 6 digits of my serial number is 110025. I think it's safe to say my turbo is #25.

18psi

iTrader: (76)

Have them replace it with #69

Faeflora

iTrader: (2)

So what did full race / borg say?

soviet

iTrader: (10)

I called them then emailed the picture/video.
I'll call them back later if I don't hear by like 5pm (3pm their time).
Basically I want to know if I can make my (already paid for) track day June 23-24.

hustler

iTrader: (6)

Tell them you are KGB.

pusha

iTrader: (5)

soviet

iTrader: (10)

Just to update this thread.

I talked to Jon @ Full Race yesterday and promised me an RMA. I called him up again today, and sure enough, he sent me the RMA information. Now I just have to send the broken turbo. That's taken care of and went very smooth (so far!). Expected delivery date for replacement is Mid-August - a date which I'm pessimistic about. I'm a consultant, I know how estimates work.

If you read my thread, you know that Bryce offered to sell me his BNIB EFR6258 since his project is taking forever.

So while on the phone with Full Race, I asked - how I would ensure that Bryce's turbo has the turbine wheel issue fixed?

Short answer - you don't. I was told that there have been no new EFR turbos in the country since approximately Fall 2011. That means every EFR 6258 turbo out there is possibly subject to this spontaneous failure. I didn't inquire if this issue affects the larger frame turbos.

What am I going to do? I'm not sure. I'm going to drink a little bit more liquid courage and probably buy Bryce's turbo anyways. I mean, what's another $1500 into a 5-digit budget project, right?

Bryce's turbo is serial 110021. Mine is 110025.

Savington

iTrader: (31)

It's fine that you can't justify it, but get your facts right. It's a $1450 turbo, not a $2000 turbo. It doesn't perform "as good" as an $800 turbo - the cheapest Garrett DBB is $1k, and the EFR knocks it out of the park. No Garrett turbo comes close to the same combination of low-end torque and high-end power.

I'm not expecting people to cross-shop them against Chinese turbos, but they are worth every penny of the $1450 BW asks for them.

soviet

iTrader: (10)

Also I would like to say that I love EFR to death. Garrett actually sent me an email saying that want to help me out and that a GTX2860R would fit my application. I could do it (probably get a cheap-ish GTX that hasn't been out for 3 months yet). But frankly, I would have a sucky 40-year old technology internal wastegate that wouldn't satisfy my 30psi goals. I would have to get a BOV. I would have to go back to the garage and get dirty.

I just did 5 months of that and I *don't* want to go back. I want to drive my car. Next week. It's glorious. It makes me happy. Sourcing a fabricator to weld a BOV fitting doesn't make me happy. Waiting for parts doesn't make me happy.

I really wish there was more transparency in this issue so at least I could plan for it and be ready. As of right now I'm stuck dead in the water with my only options being
a) bleed money
b) go with a sub-par setup (personal opinion)

I like Garrett and would totally rock the hustler setup. But that means drilling inconel bolts for safety wire. Getting an EWG welded onto my manifold. Getting an EWG pipe welded to downpipe. Getting a BOV. I'm tired. I don't have a lot of money left. I have a house that I just bought and it needs maintenance (for real).

Savington

iTrader: (31)

FYI, that's the most accurate date I've heard in months. Last time I talked to FR was in the spring, and they were quoting "4-8 months".