Redheadedstepchild

Been doing a healthy amount of research on here and a handful of other sites. Lots of man hours surfing the web and sifting to build threads. Both relevant and irrelevant information and a plethora of fail lol.

I've decided it's time to set out a build plan and etch some goals out for my car. Lots of research has lead me to purchasing my miata. Superior power to weight possibility, coupled with aggressive handling and a potent power plant to build from. The positive remarks go on and on etcetera etcetera....

So as far as my choosing to build the 1.6 it's simple... I have a hoard of 1.6's to choose from locally. As well as two spare long blocks in the workshop. I know I will probably get flamed pretty bad for wanting to stick with the 1.6 over swapping a 1.8 in.

Motor will be machined and assembled in stages. Any insight on some of the parts I have thought about using as well as criticism both positive and negative will be reviewed.

The head is going to get the works. Port and polish, bowl work, deshrouded valves, and so on.

1.6 93 head full port and polish
Kelford 272 cams
Supertech dual valve springs and retainers
Supertech 1mm oversized exhaust valves (to help spool)
Supertech intake valves (high flow)
Solid lifter conversion including shim under bucket
New seals and valve guides
Shaved to square and clearanced for the cams

Now for the block
1.6 93 block
Fresh hone
Complete rebuild using eom gaskets and seals
Cometic head gasket
Arp head studs
Arp main studs
Arp 2000 rod bolts
Pro-gram Billet main caps
Cp forged pistons 9.0:1 cr
Manley h-beam rods
Stock crank
Ati super damper pulley
Underdrive water pump pulley
Underdrive alternator pulley

Fuel:
Dw1000 injectors
Fuel lab afpr
Dual feed fuel rail
Custom -an fuel lines from tank to rail
E85 inline fuel filter
Aeromotive stealth 340lph fuel pump

Ecu:
Mspnp either DIY from someone on here or a complete assembled pnp from diyautotune.com
Cop conversion using ls2 coils
Inline coolant temp sensor with custom adapter
Gm Iat mod
Variable tps
Modified trigger wheel?? Maybe
Ebc and lc-1 wideband

Now the go fast parts
Turbo selection to date is a gt3582r twin scroll hotside anti-surge compressor housing (moar powahh)
Custom tubular style manifold
44mm wastegate (10psi spring)
Quick spool valve
Full 3" v-band downpipe
4" custom v-band from dp to muffler?
High flow cat?
Bar and plate fmic 30x12x4 3" in/out
3" hotside piping 2 1/2" coldside piping
Turboxs bov
Vanjen intercooler couplers throughout
Custom honda intake manifold

This is by no means a complete list, merely a rough draft of the masterpiece to be assembled under the hood. The driveline will get the usual 6spd swap and 3.9 Torsen rear end with rx7 clutch type diff. 15x9 ccw wheels haven't decided on rubber yet. Fully adjustable suspension all the way around. Autokonexion complete wide body kit including fastback top and Goodwin racing gtc-200 wing.

There's the plan. Have at it. Scold, criticize, compliment, whatever it may be. I have had a hand in building quite a few one-off track Demons and strip monsters. I've always wanted something to call my own that I can pour my blood sweat and tears into. Not new to fabrication and I'm by no means slow to learn. Hopefully I'll get a few views by some pretty knowledgable people. TEACH ME YOUR WAYS!! That is all

nitrodann

wtf man?

curly

iTrader: (25)

Very interested in this rx-7 clutch type Torsen. You've done some impressive research, that's for sure.

BoostedSmurf

iTrader: (1)

I know the S4 Rx7 TII diff is a clutch type LSD, but you say you'll have a 6 speed with a torsen?

Redheadedstepchild

Brain had an awesome writeup on what LSD setups can be used here:https://www.miataturbo.net/useful-saved-posts-8/diy-faq-all-your-answers-one-big-post-10821/
Will take some doing but I think the rx7 clutch type will be better suited for my goals.

Redheadedstepchild

I have also been doing some research on tuning failsafes. I know that running e85 will leave me with some headroom as far as timing is concerned. I want to come up with a way to detect "lean events" and knock a lot sooner then when I disassemble a blown motor.

I came across this multiple input LCD get gauge

http://thesensorconnection.com/gauge...yrometer-gauge

That, coupled with four individual egt sensors welded onto the individual runners on my tubular manifold will allow to monitor egt's per cylinder in real-time

nitrodann

You really need idiot lights. You will never be able to watch those gauges.

Dann

Redheadedstepchild

Not so much of an idiot light as it would be assistive to tuning. Being able to closely monitor individual egt's could prove very useful for sensing lean burn conditions. If there was a way to wire in a warning system from the gauge to the ecu to trip it into limp mode I'm not sure. Would certainly save a substantial amount of money being spent on machining and internal components of my motor.

ThePass

iTrader: (3)

Best of luck...

Redheadedstepchild

Still trying to track down info on a decent/proven catch can setup. And wondering is there are any distinct advantages to a v-mount intercooler on a street car.

Savington

iTrader: (31)

1.6L with a 35R and Kelford 272s? That will drive real nice

Redheadedstepchild

I know I'm not doing anything new here, just trying to gain as much information as possible before final assembly takes place. I want to do it once and do it right. And reliability is certainly desired but sacrifices have to be made especially with the power goals I'm shooting for

Savington

iTrader: (31)

Just curious - how much do you think this will cost you?

Redheadedstepchild

Not entirely sure as of yet, a lot of parts are being sourced new so that's going to be a bit more pricey but not having to use someone else's "throw away" parts is a plus. I'm guessing somewhere around 4-5k plus machining just for the motor. Another 3200 for the wide body and fastback conversion. 2500 for rims and suspension. 800 for tranny and rear end. 500 for random odds and ends.

Quality Control Bot

iTrader: (3)

Been doing a healthy amount of research on this thread. Lots of milliseconds skimming the posts. All irrelevant information and a plethora of fail lol.

Braineack

iTrader: (62)

******* comedy gold right here.

Redheadedstepchild

Ultimately what I intend to do with the car probably doesn't conform with what is normally expected. A lot of autox and hill climbing guys on here as well as serious drivers and enthusiasts. I more or less want a car with power closer to to top of the power band. More of a freeway runner then a canyon carver. Just an all around enjoyable platform with room for improvement if I ever wanted to get serious about autox or track days.

Quality Control Bot

iTrader: (3)

Hmm. You seemed more like a power bottom to me.

Redheadedstepchild

To put it plainly I had two options. 1) Go out and purchase a new Evo or STI and spend the next 7 years and 45k paying for a stock vehicle. 2) Spend less then a third of that on doing something I enjoy, wrenching on my project, and end up with a spirited roadster that I've built with my own two hands.

This has been the only site where viable and intelligent information has been well documented and shared. Which is 90% of the reason I registered. Albeit getting that information takes some finesse and effort. In the end it's worth it to receive the know-how to get it done properly the first time and learn from others who have walked the unbeaten path before me.

Leafy

iTrader: (1)

Let me help you help yourself save a whole bunch of money an end up with something that doesnt have a 1000 rpm wide powerband.


1.6 93 head full port and polish stock vvt head
Kelford 272 cams
Supertech dual valve springs and retainers
Supertech 1mm oversized exhaust valves (to help spool)
Supertech intake valves (high flow)
Solid lifter conversion including shim under bucket
New seals and valve guides
Shaved to square and clearanced for the cams

Now for the block
1.6 93 block 1.8 block
Fresh bore hone
Complete rebuild using eom gaskets and seals
Cometic OEM head gasket
Arp head studs
Arp main studs
Arp 2000 rod bolts
Pro-gram Billet main caps
Cp forged pistons 9.0:1 cr supertech pistons, 8.6:1 CR
Manley h-beam rods
Stock crank
Ati super damper pulley 949 racing super miata damper
Underdrive water pump pulley
Underdrive alternator pulley
Boundary Engineering street/strip VVT oil pump
DIY coolant reroute with BEGI spacer, KIA neck, and caddy hose

Fuel:
Dw1000 injectors Injector dynamics or FIC 1000's or 1300's
Fuel lab afpr
Dual feed fuel rail
Custom -an fuel lines from tank to rail stock lines from tank to rail
E85 inline fuel filter stock fuel filter
Aeromotive stealth 340lph fuel pump Wally 400E85 fuel pump, rewired

Ecu:
Mspnp either DIY from someone on here or a complete assembled pnp from diyautotune.com MS3e from MS Labs
Cop conversion using ls2 coils
Inline coolant temp sensor with custom adapter stock coolant sensor
Gm Iat mod
Variable tps stock NB tps
Modified trigger wheel?? Maybe 36-1 trigger wheel
Ebc and lc-1 wideband

Now the go fast parts
Turbo selection to date is a gt3582r twin scroll hotside anti-surge compressor housing (moar powahh) EFR6758, single scroll housing
Custom tubular style manifold
44mm wastegate (10psi spring)
Quick spool valve
Full 3" v-band downpipe, or 3.5" if you can fit it
4" 3" custom v-band from dp to muffler?
High flow cat? No cat
Bar and plate fmic 30x12x4 3" 2.5" in/out
3" 2.5" hotside piping 2 1/2" coldside piping
Turboxs bov
Vanjen ebay intercooler couplers throughout
Custom honda intake manifold VICS or flatop intake manifold