Welcome to Miata Turbo Forum - Turbo Kitten is watching you test compression.
Welcome to Miata Turbo Forum - Turbo Kitten is watching you test compression.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I was browsing some Evo forums and saw a lot of them guys where running 30+ psi on 93 oct on meth. and was wondering if I could do the same on a Miata motor (built motor of course) I plan on running 28-30 psi on pump gas/meth and 35+ psi on race gas/meth. My goal is over 400 whp on pump/meth with a 1.6. I'm currently at 380 whp 25 psi on 110 leaded Sunoco gas.
My second question is what are you guys doing for ignition on a high boost Miata? It seems i'm starting to break up a bit on high boost, I saw Flyin' Miata run a LS coil set up does anyone know more about this set up? Or are COPS sufficient? Thanks a lot in advance.
Jason-
__________________
PRO EFI/w flex fuel, EFR 7670 T4 Twin Scroll, E85, ARTech manifold, 1650CC injectors, 3.5" DP/4" exhaust. A lot of boost
Most boost on pump/meth injection and ignition..
