sawjai526

Hello miataturbo.net

I've searched through the forum but i can't find an answer.
I have a 93 turbo Miata, I need to locate a place to mount the 1/8npt sender . I have oil filter sandwich plate for oil cooler. the block ports are being used for turbo feed. I don't want to mount the sender at the drain plug either.

What options do I have?

thanks

JasonC SBB

Glue non-threaded sender to back of oil pan with epoxy, then insulate a large area around it with silicone.

sawjai526

How accurate will the reading be? I have autometer gauge. Where can i buy this kind of sender?

JasonC SBB

For a Westach:

https://www.miataturbo.net/showthrea...ghlight=sender

sawjai526

Wow, I would've never found that on google. while I was waiting for a response I found a solution that might work!

http://www.jegs.com/i/Russell/799/670083/10002/-1

Some temperature sender has longer probe, So you will need to fit an adapter to get adequate clearance.

thanks jason!

miata_racer

Ok...just to bump an OLD thread here...

I have this - http://flyinmiata.com/index.php?dept...0%20%201990-93

Russell fitting from the post above (this one) - http://www.jegs.com/i/Russell/799/670083/10002/-1

Will that Russell fitting replace one of the fittings in the Mocal plate in the FM kit? I assume yes.

2nd question...which sender/gauge brand would be a good one to go with?


I appreciate the help