going to get my a$$ ripped for this question
#1
I'm Miserable!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: monroe CT
Posts: 463
Total Cats: 0
going to get my a$$ ripped for this question
Well took my block apart all the way today and what do i find bent rods. i guess that's better then snapped rods. so i started to think because i only want to make 300whp i wanted to know if the lower comp pistons from the 94 to 97 miata would work in the 99 miata block. so if it is possible let me know and if you know any one selling some 94-97 miata pistons and rods that would be great.
#2
As about Thirty people told me.
Search.
Lol.
Im sure those pistons will handle the power goal.
As far as fitment, As long as its the same bore and displacement, I dont see why not. And as far as me knowing anyone who has some, Well... This is the wrong section for that, search in the For Sale.
Its funny because, I got my *** drilled because I didn something wrong, not knowing I did something wrong. But you, your title is " I know im gonna get my *** drilled " You KNOW you are going to, yet, you ask anyways =]
Search.
Lol.
Im sure those pistons will handle the power goal.
As far as fitment, As long as its the same bore and displacement, I dont see why not. And as far as me knowing anyone who has some, Well... This is the wrong section for that, search in the For Sale.
Its funny because, I got my *** drilled because I didn something wrong, not knowing I did something wrong. But you, your title is " I know im gonna get my *** drilled " You KNOW you are going to, yet, you ask anyways =]
#4
I'm Miserable!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: monroe CT
Posts: 463
Total Cats: 0
i ask because the old post are the old post and today is a new day and some one might have more info then the old post will tell you but i did do a search last night for it. not too much info on people trying it that i could find
#8
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
Others have adequately covered the many other variables in play.
#10
Let me know if you need rods.. We have them in stock and ready to ship
Welcome to M-Tuned.com 2.0 - Miata Rods
You should be fine with our rods and stock pistons. I've got a lot of customers who have done just that.
Welcome to M-Tuned.com 2.0 - Miata Rods
You should be fine with our rods and stock pistons. I've got a lot of customers who have done just that.
#11
Thats heavy detonation, plastic compression deformation caused by extreme pressure on the piston crown. Over rev is always plastic elongation deformation. Looks like playdoe when you pull it apart. I'd slap some new stock rods back in there if you are not going for extreme R.P.M. An aftermarket rod in that case would not have made a difference. Think of it this way. You had 3 pistons making power and another spitting fire on your tubine blade for spooling. Its a feature, rock it out.
#12
I'm Miserable!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: monroe CT
Posts: 463
Total Cats: 0
Ya i was getting mad boost crapp on wastegate 10psi 7psi wastegate and i was spoolin by 2600 7psi and 3000 the 10psi and the turbo started to glow red with out getting on the gas and when i added fuel just ran shitty so i did a comp test and found cyl1 had 115psi and the rest had 180 and i had a bad exhaust valve in cyl 1.
#13
Yeah, I was getting mad boost creep, up to 10psi. The wastegate is set for 7 psi and I was spooling to 7 psi by 2600 rpm and by 3000 rpm it had crept to 10 psi and the turbo started to glow red without getting on the gas. When I added fuel it just ran shitty so I did a compression test and found cylinder 1 had 115psi, and the rest had 180. I have a bad exhaust valve in cylinder 1.
#15
Thats heavy detonation, plastic compression deformation caused by extreme pressure on the piston crown. Over rev is always plastic elongation deformation. Looks like playdoe when you pull it apart. I'd slap some new stock rods back in there if you are not going for extreme R.P.M. An aftermarket rod in that case would not have made a difference. Think of it this way. You had 3 pistons making power and another spitting fire on your tubine blade for spooling. Its a feature, rock it out.