The Fab9Tuning Side-Mount Turbo Manifold & Downpipe Kits - NOW SHIPPING. EFR+Garrett
03-19-2015, 03:57 PM
#1
The Fab9Tuning Side-Mount Turbo Manifold & Downpipe Kits - NOW SHIPPING. EFR+Garrett
Introducing the solution many of you have been waiting for and now don't have to. The all new Fab9Tuning Side-Mount V-Band manifold and downpipe for the 1.8 BP Miata.
Like many of the solutions we offer, we set out to solve problems with quality solutions that don’t break the bank. Whilst cost will not be sky high, don’t be fooled, we’ve sacrificed nothing in the means of quality and functionality.
When paired with Borg Warner EFR technology that continues to prove itself on our small displacement engines you can expect extreme efficiency that will produce a much more linear power delivery than could be expected in the past from similar sized GT or even GTX solutions.
Our Garrett V-Band solutions cover Garrett, ATP and TiAL housings, you'll need to specify upon purchase (we inventory each of these housing options for a proper fit per build) and offer the same clearances found with the EFR package.
Features:
• Full Stainless Construction
• Sch10 Thick Wall 304 Stainless
• 0.500” CNC’d Flange
• Oval to Round Port Transitions
• Fully Back Purged Tig Welded Fabrication
• High Flow Merge Collector
• Side Mount AC + PS Compatible Design
• Wastegate options include External-TiAL, External Turbosmart 40mm+, Internally gates setup permitting turbo compatibility.
• No cutting or modification of the engine bay
• Compatible with RX-7 TII Swapped Vehicles
• Entire setup ships under our $9 shipping program
Introductory Bonus - 5 units have already sold and shipped - For anyone looking to purchase a Turbo + Manifold, Downpipe combo we're offering a $100 rebate on the next 15 kits, please contact us before or within 24 hours of your purchase to qualify for the discount.
PRODUCT LINK HERE
If you'd like any further details please feel free to contact us, international shipping can be arranged but it is not covered under our $9 flat rate program.
Like many of the solutions we offer, we set out to solve problems with quality solutions that don’t break the bank. Whilst cost will not be sky high, don’t be fooled, we’ve sacrificed nothing in the means of quality and functionality.
When paired with Borg Warner EFR technology that continues to prove itself on our small displacement engines you can expect extreme efficiency that will produce a much more linear power delivery than could be expected in the past from similar sized GT or even GTX solutions.
Our Garrett V-Band solutions cover Garrett, ATP and TiAL housings, you'll need to specify upon purchase (we inventory each of these housing options for a proper fit per build) and offer the same clearances found with the EFR package.
Features:
• Full Stainless Construction
• Sch10 Thick Wall 304 Stainless
• 0.500” CNC’d Flange
• Oval to Round Port Transitions
• Fully Back Purged Tig Welded Fabrication
• High Flow Merge Collector
• Side Mount AC + PS Compatible Design
• Wastegate options include External-TiAL, External Turbosmart 40mm+, Internally gates setup permitting turbo compatibility.
• No cutting or modification of the engine bay
• Compatible with RX-7 TII Swapped Vehicles
• Entire setup ships under our $9 shipping program
Introductory Bonus - 5 units have already sold and shipped - For anyone looking to purchase a Turbo + Manifold, Downpipe combo we're offering a $100 rebate on the next 15 kits, please contact us before or within 24 hours of your purchase to qualify for the discount.
PRODUCT LINK HERE
If you'd like any further details please feel free to contact us, international shipping can be arranged but it is not covered under our $9 flat rate program.
Last edited by FAB; 09-17-2015 at 09:55 AM.
Reply
0
0
03-24-2015, 02:43 PM
#10
Applicable EFR Turbochargers added to the EFR Side Mount Manifold product page with $100 discount built into each option.
LINK: PRODUCT PAGE
LINK: PRODUCT PAGE
Reply
0
0
04-08-2015, 09:47 AM
#12
EGT Port Individual runner location: There is adequate clearance on the bottom side of the manifold for installation of 4 EGT probes.
6758 Dyno plot - We do not, we've now shipped a handful of these manifolds and to my knowledge a 6758 has not seen the rollers.
Let me know if you have any further questions.
Reply
0
0
04-16-2015, 05:47 PM
#13
First customer to get our kit on the rollers and we couldn't be more satisfied! Jeff did a great job putting this car together and the results are impressive at only 20PSI!:
- Fab9Tuning EFR Side Mount Manifold
- Fab9 Stage 1 Intercooler
- EFR 6258 V-Band
- Turbosmart Wastegate
Last edited by FAB; 04-16-2015 at 06:14 PM.
Reply
0
0
04-18-2015, 11:56 PM
#18
That's about right - The EFR has proven to spool faster in the comparison between the EFR 6258 and the GTX2867R. The GT2871r has also been a common comparison. A quick search will turn up a handful of actual back to back comparisons. Impressive results in the EFR's favor but it's not exactly an apples to apples battle comparing the EFR technology with the older GT turbos.
I'd love to do a GTX comparison myself but I can't even find the time to wrench on my personal car with the ramp up in business this year, we'll be expanding our team here shortly - hopefully this will open us up to some longer term projects.
I'd love to do a GTX comparison myself but I can't even find the time to wrench on my personal car with the ramp up in business this year, we'll be expanding our team here shortly - hopefully this will open us up to some longer term projects.
Reply
0
0
04-19-2015, 08:51 AM
#19
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680
That's about right - The EFR has proven to spool faster in the comparison between the EFR 6258 and the GTX2867R. The GT2871r has also been a common comparison. A quick search will turn up a handful of actual back to back comparisons. Impressive results in the EFR's favor but it's not exactly an apples to apples battle comparing the EFR technology with the older GT turbos.
I'd love to do a GTX comparison myself but I can't even find the time to wrench on my personal car with the ramp up in business this year, we'll be expanding our team here shortly - hopefully this will open us up to some longer term projects.
I'd love to do a GTX comparison myself but I can't even find the time to wrench on my personal car with the ramp up in business this year, we'll be expanding our team here shortly - hopefully this will open us up to some longer term projects.
Reply
0
0
