Post up your 460cc and 550cc settings
04-23-2008, 11:37 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Location: AC, NJ
Posts: 345
Total Cats: 0
Post up your 460cc and 550cc settings
Just wanted to get a general idea of what kind of numbers you guys with 460cc or 550cc injectors were running.
So if you don't mind...
Post up your: Cranking Settings and Acceleration Wizard
So if you don't mind...
Post up your: Cranking Settings and Acceleration Wizard
Reply
0
0
04-24-2008, 12:31 AM
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
These are with 440cc on HiRez. Note that numbers below 60° haven't actually been tested, as it doesn't get cold here.
You don't want to see my accel settings, just trust me...
You don't want to see my accel settings, just trust me...
Reply
0
0
04-24-2008, 02:38 AM
#5
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
Yes. The following idle setting assume that the flyback diode is across the IAC valve. When I first built my system I forgot it, and after I installed it I had to radically change my idle config. These settings give a "good" idle at ~14.7, and a downright perfect idle at 13.5 - 14. Also note that the "Cranking (dc)" parameter on this screen is a crucial part of the cranking config. It gets you "over the hump" between true cranking and actually achieving a stable idle.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM
