The New Nasty Miata Part Out
11-27-2008, 09:46 PM
#1
I'm Miserable!
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Orlando, FL
Posts: 166
Total Cats: 0
The New Nasty Miata Part Out
2003 1.8 vvt Engine $3200 (Oil pan to Valve cover, Intake Mani, Ecu, Wiring Harness, and clutch all there)
the parts in it
Belfab Racing High Performance Engine Kit
·Complete Gasket Set
.Belfab Pro H Beam Rods
·Supertech Forged Pistons 83.5mm Bore 9:1
·Supertech Valve Spring Kit
(Springs, Titanium Retainer, and Seats)
.HP Rods, Mains and Thrust Bearings
Will also have 550cc rx7 injectors with modified fuel rail to add inline fpr and gauge, act clutch, and all the accessories.
Turbo Kit $1000
·Garret t25 $150
·Custom Manifold $250
·FMIC HKS Sequential BOV $300
·Exhuast Elbow & DP $125
·AEM FI/C (tuned for:550cc,t25 10psi)$300
·Autometer Boost Guage $40
Tranny $500
Torsion LSD $500
Any questions feel free to ask.
I will post another thread with the interior pieces after I separate them and take pictures.
the parts in it
Belfab Racing High Performance Engine Kit
·Complete Gasket Set
.Belfab Pro H Beam Rods
·Supertech Forged Pistons 83.5mm Bore 9:1
·Supertech Valve Spring Kit
(Springs, Titanium Retainer, and Seats)
.HP Rods, Mains and Thrust Bearings
Will also have 550cc rx7 injectors with modified fuel rail to add inline fpr and gauge, act clutch, and all the accessories.
Turbo Kit $1000
·Garret t25 $150
·Custom Manifold $250
·FMIC HKS Sequential BOV $300
·Exhuast Elbow & DP $125
·AEM FI/C (tuned for:550cc,t25 10psi)$300
·Autometer Boost Guage $40
Tranny $500
Torsion LSD $500
Any questions feel free to ask.
I will post another thread with the interior pieces after I separate them and take pictures.
Last edited by ripracer; 12-23-2008 at 02:53 PM.
Reply
0
0
11-28-2008, 04:05 PM
#5
I'm Miserable!
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Orlando, FL
Posts: 166
Total Cats: 0
Correct. I saw on his post he is selling stuff like it is still his. This is not the case, I have everything Mazda Miata he had. I think he is kinda just trying to help me out with it.
We also have someone that sent a check for $7500 for the whole motor and turbo set-up. I'm giving the check 7 days to clear before I make any official sales of motor parts. I think its a scam though.
We also have someone that sent a check for $7500 for the whole motor and turbo set-up. I'm giving the check 7 days to clear before I make any official sales of motor parts. I think its a scam though.
Reply
0
0
11-29-2008, 08:09 PM
#9
I'm Miserable!
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Orlando, FL
Posts: 166
Total Cats: 0
I returned all pms.
I have all the parts, but b/c he(Pedro) might have a buyer for the the motor setup, turbo and all I'm at a stand still. Anything I might be able to use on an NA chassis I'm holding on to in case I end up keeping the engine.
For now I'm only willing to sell the headlights, taillights, interior pieces.
If someone is interested in the motor I will be willing to part out everything, just have to sell it first b/c it's kind of where all my eggs are.
I have all the parts, but b/c he(Pedro) might have a buyer for the the motor setup, turbo and all I'm at a stand still. Anything I might be able to use on an NA chassis I'm holding on to in case I end up keeping the engine.
For now I'm only willing to sell the headlights, taillights, interior pieces.
If someone is interested in the motor I will be willing to part out everything, just have to sell it first b/c it's kind of where all my eggs are.
Reply
0
0
12-12-2008, 06:40 PM
#17
I'm Miserable!
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Orlando, FL
Posts: 166
Total Cats: 0
Its cool man I can understand that. I was suppose to see money today for the entire turbo kit. I should have some feedback next week, the first of parts sold were shipped today.
Reply
0
0
