General Miata Chat A place to talk about anything Miata

head room problem

Old 04-29-2008, 02:46 AM
  #1  
Junior Member
Thread Starter
 
zebro racing's Avatar
 
Join Date: Feb 2007
Location: Tallahassee, FL
Posts: 129
Total Cats: 0
Default head room problem

so im 6'2ish, i NEED to lower the seats as much as possible. appart from taking foam out of the seat, has anyone delt with this problem? are there any lowing seat bracket kits out there?
zebro racing is offline  
Old 04-29-2008, 03:05 AM
  #2  
Junior Member
iTrader: (1)
 
TeamPLUR's Avatar
 
Join Date: Oct 2007
Location: San Diego, Ca
Posts: 209
Total Cats: -1
Default

Originally Posted by zebro racing
so im 6'2ish, i NEED to lower the seats as much as possible. appart from taking foam out of the seat, has anyone delt with this problem? are there any lowing seat bracket kits out there?


im 5'9~5'10 if I've had my wheaties, I know you are considerably taller than me, but i sit nearly straight up and my head used to hit the roof. This seat is the 10 degree kirkey econ, 100 bucks and 60 for the slip cover, as it is, it sits 4 inches lower than stock, and i retained the stock sliders, I plan to find a good spot for it and remove the sliders so i can basically sit on the floor, mostly for ***** and giggles but also because my rear view mirror actually obstructs my view, SURPRISINGLY so . .
tho i must say
Best $160 i ever spent on my car.
TeamPLUR is offline  
Old 04-29-2008, 03:06 AM
  #3  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

There are no seat lowering bracket kits out there for the miata I know of.
Samnavy is the king of low. Cut foam out of the seat, bend the front of the bracket lower and notch out the front hole. Get a race seat and bolt it to the floor withoutsliders. Remove the seat standoffs from the floorboard and bolt a seat to the floor that way for even more headroom.

How low do you want to go and why do you want to be that low? 2" helmet rule or what?
I'm 6'2 and you can read my rollbar thread here.
https://www.miataturbo.net/forum/sho...ht=rollbar+die
It talks about modifying things to gain more headroom.
cjernigan is offline  
Old 04-29-2008, 11:18 PM
  #4  
Junior Member
Thread Starter
 
zebro racing's Avatar
 
Join Date: Feb 2007
Location: Tallahassee, FL
Posts: 129
Total Cats: 0
Default

Originally Posted by cjernigan
How low do you want to go and why do you want to be that low? 2" helmet rule or what?
i have to look over or under the horizontal between the a-pillers to see most traffic lights.
zebro racing is offline  
Old 04-29-2008, 11:28 PM
  #5  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

Originally Posted by zebro racing
i have to look over or under the horizontal between the a-pillers to see most traffic lights.
Who doesn't? Seriously damn near everyone has to do that to see traffic lights. If you don't like it then don't pull as far forward and you won't have to duck to look up at them.
The foam extomy will help some for that. Removing your driver side visor will as well.
cjernigan is offline  
Old 04-29-2008, 11:31 PM
  #6  
Elite Member
iTrader: (12)
 
icantthink4155's Avatar
 
Join Date: Apr 2008
Location: Longs, SC
Posts: 2,566
Total Cats: 13
Default

Im 6' and All the way back on the seat slider thingys, I got a good amount of room, its just easier to look over the windshield to see lights.
icantthink4155 is offline  
Old 04-29-2008, 11:58 PM
  #7  
Antisaint
iTrader: (17)
 
Vashthestampede's Avatar
 
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
Default

I sit at 5'11" and really don't have any issue like that. Do you sit straight up with the seat all the way forward? Most aftermarket seats drop you the amount you would probably want. Also enough to make smaller 5'8" sized dudes feel even smaller.

Vash-
Vashthestampede is offline  
Old 04-30-2008, 12:05 AM
  #8  
I'm Miserable!
iTrader: (5)
 
zoom2zoom's Avatar
 
Join Date: Sep 2005
Location: SLC, Utah
Posts: 1,589
Total Cats: 0
Default

I'm 6'1" and do just fine!
zoom2zoom is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
04-12-2021 04:21 PM
Corky Bell
Prefabbed Turbo Kits
18
11-22-2016 09:01 PM
mx592
Suspension, Brakes, Drivetrain
1
10-01-2015 12:45 AM
shooterschmidty
Engine Performance
8
09-30-2015 10:28 PM


Thread Tools
Search this Thread
Quick Reply: head room problem



All times are GMT -4. The time now is 07:22 PM.