boost controller wiring
04-23-2007, 09:51 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, Ca.
Posts: 502
Total Cats: 0
boost controller wiring
Heyas,
HDI boost controller finally arrived today.
Intstructions say to hook up the red wire to 12V, blue wire to Ignition +, and green wire to ground. I tapped the wires near the ignition to do this:
Red - Blk/red
Blue - Blk/blue
Green - Blk grnd
No power to the controller.
Tried Blue - ignition harness blue as well.
That's the same wire my EGT gauge is wired into so I know it works. Still seems like no power to the controller.
Any help would be appreciated.
HDI boost controller finally arrived today.
Intstructions say to hook up the red wire to 12V, blue wire to Ignition +, and green wire to ground. I tapped the wires near the ignition to do this:
Red - Blk/red
Blue - Blk/blue
Green - Blk grnd
No power to the controller.
Tried Blue - ignition harness blue as well.
That's the same wire my EGT gauge is wired into so I know it works. Still seems like no power to the controller.
Any help would be appreciated.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
