too much variance for injectors?

Reply Subscribe

Thread Tools

Search this Thread

02-04-2008, 05:58 PM

trito

Junior Member

Thread Starter

iTrader: (1)

Join Date: Jun 2005

Location: San Jose

Posts: 213

Total Cats: 0

too much variance for injectors?

Hi,

I sent a set of injectors to get cleaned and tested. Here are the results.

Name: flow_test.jpg
Views: 461
Size: 62.0 KB

Is there too much variance to use these?

Thanks,

t.t.

02-04-2008, 07:06 PM

Savington

Former Vendor

iTrader: (31)

Join Date: Nov 2006

Location: Sunnyvale, CA

Posts: 15,442

Total Cats: 2,099

I don't think so, although there is no straight CC/min measurement there. If those are Supra 305s, and you triple test 5 to get a full minute of static flow, you get 303/300/306/303, which is well within acceptable.

Put the "largest" injector on the 4th cylinder.

02-04-2008, 07:17 PM

trito

Junior Member

Thread Starter

iTrader: (1)

Join Date: Jun 2005

Location: San Jose

Posts: 213

Total Cats: 0

There's about 7% variance in the dynamic pulsed flow. Is static the only one I should worry about?

02-04-2008, 11:45 PM

Markp

Senior Member

Join Date: Mar 2006

Posts: 1,380

Total Cats: 2

I wouldn't sweat it either... I would run the fat injector on #4. If you run full sequential you might be able to trim the injectors slightly but they are close enough.

Mark