General Miata Chat A place to talk about anything Miata

Picked up my First Miata This Week

Thread Tools
 
Search this Thread
 
Old 02-10-2013, 04:11 PM
  #1  
Newb
Thread Starter
 
davidk72008's Avatar
 
Join Date: Feb 2013
Location: Huntsville, AL
Posts: 6
Total Cats: 0
Default Picked up my First Miata This Week

Hey guys, I just picked up my first Miata, and its a 2005 Black Mica Mazdaspeed Miata. I'll post some pics at the end of this post of it so that everyone can see it. Anyways, the car has a shudder when I start to take off in first after it is warmed up, and I've pretty much come to the conclusion that it has something to do with the clutch or flywheel. I have done several searches that all suggest that or possibly motor mounts.

Anyways, the car makes 185 lb-ft at the wheels and 198 whp. What would some of you suggest as a clutch replacement for this power level for a daily driven car? I would prefer something that has a little room for some more mods as well. I have read where a lot of people suggest ACT clutches or FM clutches. Basically I am wondering if anyone can give me any insight based off of first hand experience on the type of clutch you have run. If you could mention clutch type, cost, driveability, and maybe torque rating that would be great! I was looking at either Exedy, ACT, or FM clutches for less than $600.

Thanks,
Here are some pics
[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]
Attached Thumbnails Picked up my First Miata This Week-img_0853_zps09d64c35.jpg   Picked up my First Miata This Week-img_0850_zps4fb0e47b.jpg   Picked up my First Miata This Week-img_0856_zpsdccb63c1.jpg   Picked up my First Miata This Week-img_0872_zps5f14adfe.jpg   Picked up my First Miata This Week-img_0871_zps88b1dd97.jpg  

Picked up my First Miata This Week-img_0854_zpsabb9c007.jpg  
davidk72008 is offline  
Old 02-10-2013, 06:25 PM
  #2  
Bannisheded
 
_-_-2000SE-_-_'s Avatar
 
Join Date: Feb 2013
Posts: 8
Total Cats: 0
Default

great lookin miata! what are your plans? i wish i could find one in black... :/
_-_-2000SE-_-_ is offline  
Old 02-10-2013, 06:55 PM
  #3  
Junior Member
 
Morshu's Avatar
 
Join Date: Nov 2012
Location: SF Bay Area
Posts: 58
Total Cats: 0
Default

Are you looking for a clutch alone or flywheel as well?
Morshu is offline  
Old 02-10-2013, 07:00 PM
  #4  
Newb
Thread Starter
 
davidk72008's Avatar
 
Join Date: Feb 2013
Location: Huntsville, AL
Posts: 6
Total Cats: 0
Default

This one is for sale haha. I constantly wheel and deal cars, and then I just work with them while I have them. If I keep it for a while I will probably put another clutch in it, maybe a short throw shifter, and then maybe take it to get a tune myself. It runs good like it is, but I don't know a whole about who tuned it previously or anything. I do have a dyno graph showing the A/F ratios, and they look pretty good. However, that was before the intercooler, exhaust, and intake were added.
davidk72008 is offline  
Old 02-10-2013, 07:02 PM
  #5  
Newb
Thread Starter
 
davidk72008's Avatar
 
Join Date: Feb 2013
Location: Huntsville, AL
Posts: 6
Total Cats: 0
Default

Originally Posted by Morshu
Are you looking for a clutch alone or flywheel as well?
I'm thinking I might just resurface my stock flywheel, but if can get a clutch/flywheel package for a reasonable price I will go that route. Just depends on what kind of reviews I can get from people on what they have used and have experience with.
davidk72008 is offline  
Old 02-15-2013, 05:53 PM
  #6  
Senior Member
iTrader: (2)
 
Der_Idiot's Avatar
 
Join Date: Nov 2007
Location: Saint Paul, MN
Posts: 1,489
Total Cats: 28
Default

This is the flywheel I use, and This is the clutch I use. I daily drive this in the summer in some pretty annoying bumper to bumper traffic.

Extremely manageable and I can flow through the gears much faster. The car came more... alive after I installed this.
Der_Idiot is offline  
Old 02-15-2013, 05:56 PM
  #7  
Elite Member
iTrader: (2)
 
thenuge26's Avatar
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 3,267
Total Cats: 239
Default

Originally Posted by davidk72008
I'm thinking I might just resurface my stock flywheel, but if can get a clutch/flywheel package for a reasonable price I will go that route. Just depends on what kind of reviews I can get from people on what they have used and have experience with.
If you were to search for any reviews, they would tell you to get the FM1.
thenuge26 is offline  
Old 02-15-2013, 06:50 PM
  #8  
Newb
Thread Starter
 
davidk72008's Avatar
 
Join Date: Feb 2013
Location: Huntsville, AL
Posts: 6
Total Cats: 0
Default

Originally Posted by thenuge26
If you were to search for any reviews, they would tell you to get the FM1.
I did search for some reviews, and I got a lot of different mixed reviews. Lots of ACT clutches, some FM1, and some others. I have pretty much decided that if I keep the car I will go with the FM. However, I have a possible trade pending already haha.
davidk72008 is offline  
Old 02-19-2013, 12:27 AM
  #9  
Senior Member
 
1993ka24det's Avatar
 
Join Date: Oct 2011
Location: The Race Track & St Pete FL
Posts: 638
Total Cats: 57
Default

Clean, I want something like that for my daily driver
1993ka24det is offline  
Old 02-19-2013, 12:59 AM
  #10  
Newb
Thread Starter
 
davidk72008's Avatar
 
Join Date: Feb 2013
Location: Huntsville, AL
Posts: 6
Total Cats: 0
Default

Originally Posted by 1993ka24det
Clean, I want something like that for my daily driver
Thanks, you can have it for a small fee. Everything is for sale
davidk72008 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM
Johnny Tater
Engine Performance
3
09-23-2015 06:10 PM
eunosgippa
MEGAsquirt
0
09-09-2015 05:19 PM
ProjectDDoS
Build Threads
1
09-09-2015 01:52 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM



Quick Reply: Picked up my First Miata This Week



All times are GMT -4. The time now is 10:19 PM.