12psi runs @ the strip
#1
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
12psi runs @ the strip
I was playing around with the launch...and I haven't got good at shifting the car yet...Not quite as smooth shifting as I would like.
I am still running the 6 Speed/4.3 diff combo, so I was almost redlining in 5th at the end of the 1/4. Hoping to swap the 3.6's sometime this month or next month.
First Run - Tried Launching in 2nd @ 4200
60ft - 2.357
1/8 time - 8.914
1/8 mph - 89.70
1/4 time - 13.499
1/4 mph - 110.78
Second Run - First Gear @3500 - Missed 5th Gear
60ft - 2.080
1/8 time - 8.824
1/8 mph - 89.83
1/4 time - 13.527
1/4 mph - 109.24
Third Run - First Gear @3500 - Missed 3rd Gear
60ft - 2.098
1/8 time - 8.917
1/8 mph - 85.16
1/4 time - 13.486
1/4 mph - 111.14
I am still running the 6 Speed/4.3 diff combo, so I was almost redlining in 5th at the end of the 1/4. Hoping to swap the 3.6's sometime this month or next month.
First Run - Tried Launching in 2nd @ 4200
60ft - 2.357
1/8 time - 8.914
1/8 mph - 89.70
1/4 time - 13.499
1/4 mph - 110.78
Second Run - First Gear @3500 - Missed 5th Gear
60ft - 2.080
1/8 time - 8.824
1/8 mph - 89.83
1/4 time - 13.527
1/4 mph - 109.24
Third Run - First Gear @3500 - Missed 3rd Gear
60ft - 2.098
1/8 time - 8.917
1/8 mph - 85.16
1/4 time - 13.486
1/4 mph - 111.14
#6
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
The next time I go to the strip, I am going to have the 3.6's intalled and get a 20psi tune together. We'll see where that takes me.
#7
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
#8
Junior Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: South of Houston, Texas
Posts: 327
Total Cats: 0
I have a Cryo Treated/Shot Peened 3.6 Ring&Pinion and Clutch-Type LSD waiting to go in. I just don't know if I am up to doing it myself, or if I am going to pay someone to do it.
You can actually see it in the first picture here:
https://www.miataturbo.net/forum/showthread.php?t=13597
BTW, I can't post this enough...the 6 speed/4.3 combo sucks big time
#12
Haha, I haven't even switched out the factory open 4.3...Tires are 205/50/15 T1R's
I have a Cryo Treated/Shot Peened 3.6 Ring&Pinion and Clutch-Type LSD waiting to go in. I just don't know if I am up to doing it myself, or if I am going to pay someone to do it.
You can actually see it in the first picture here:
https://www.miataturbo.net/forum/showthread.php?t=13597
BTW, I can't post this enough...the 6 speed/4.3 combo sucks big time
I have a Cryo Treated/Shot Peened 3.6 Ring&Pinion and Clutch-Type LSD waiting to go in. I just don't know if I am up to doing it myself, or if I am going to pay someone to do it.
You can actually see it in the first picture here:
https://www.miataturbo.net/forum/showthread.php?t=13597
BTW, I can't post this enough...the 6 speed/4.3 combo sucks big time
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM