Noob injector question
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2014
Location: QC, CANADA
Posts: 129
Total Cats: 4
Noob injector question
Hi guys,
I did my research on injectors after i actually purchased some injectors, like a noob, and i got into a pickle.
I purchased purple tops rx7 460cc injectors thinking they were 550s. The tabs don't fit the wiring harness.
Injector number is 195500-1350
Seems like they are out of a 13bt.
I was wondering if it is possible to cut and solder the connectors off of a 13bt harness?
I know this is noobish and i shouldve paid attention first and went with the regular 550s or 460ccs with plug in tabs like in the diy faq said. But they guy said they were 2020 when i lutchased them and i thought i had the right ones.
Other than that, if its not the same wiring on the connectors, is it possible to buy adapters to make them fit?
Thanks a lot guys.
I did my research on injectors after i actually purchased some injectors, like a noob, and i got into a pickle.
I purchased purple tops rx7 460cc injectors thinking they were 550s. The tabs don't fit the wiring harness.
Injector number is 195500-1350
Seems like they are out of a 13bt.
I was wondering if it is possible to cut and solder the connectors off of a 13bt harness?
I know this is noobish and i shouldve paid attention first and went with the regular 550s or 460ccs with plug in tabs like in the diy faq said. But they guy said they were 2020 when i lutchased them and i thought i had the right ones.
Other than that, if its not the same wiring on the connectors, is it possible to buy adapters to make them fit?
Thanks a lot guys.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM