So what DSM injectors fit in a miata?

Reply Subscribe

Thread Tools

Search this Thread

08-09-2009, 08:50 PM

p51hellfire

Elite Member

Thread Starter

iTrader: (28)

Join Date: May 2008

Location: St. Augustine FL

Posts: 2,299

Total Cats: 2

So what DSM injectors fit in a miata?

If any? Friend has some 4 somethings can't remember but I'm getting the friend discount and wanna know if they'll work? They should be low imp but im not sure..

08-10-2009, 09:28 AM

wildfire0310

Senior Member

iTrader: (1)

Join Date: Jun 2006

Location: Outside of the Loop-ATL

Posts: 761

Total Cats: 1

Quote:

Originally Posted by p51hellfire

If any? Friend has some 4 somethings can't remember but I'm getting the friend discount and wanna know if they'll work? They should be low imp but im not sure..

IIRC they will fit the rail and head. But they are low imps and don't believe the stock injector clips will work.

08-10-2009, 12:28 PM

Jeff_Ciesielski

Elite Member

iTrader: (10)

Join Date: Oct 2008

Location: Rhode Island

Posts: 1,770

Total Cats: 31

Quote:

Originally Posted by wildfire0310

IIRC they will fit the rail and head. But they are low imps and don't believe the stock injector clips will work.

This is correct. They are the right height and use the right o-rings to fit in the head, however the plugs are square as opposed to oval like the stockers. You can do 2 things to remedy this. 1. Shave them down ( not pretty, but it does work ) or 2. Go to napa and buy clips from a 95 Camaro.

08-10-2009, 01:12 PM

p51hellfire

Elite Member

Thread Starter

iTrader: (28)

Join Date: May 2008

Location: St. Augustine FL

Posts: 2,299

Total Cats: 2

well if i did that I have to wire in resistors still, correct? But loks like i got a set of low imp rc550

08-10-2009, 01:45 PM

p51hellfire

Elite Member

Thread Starter

iTrader: (28)

Join Date: May 2008

Location: St. Augustine FL

Posts: 2,299

Total Cats: 2

cool good to know but I got resistors w/ the rc550....

08-10-2009, 02:17 PM

DXO

Junior Member

iTrader: (2)

Join Date: Jul 2008

Location: Kannapolis, NC

Posts: 229

Total Cats: 1

I have been running the same thing for quite some time. I am using a resistor pack from a Honda Accord or Civic. Not sure which but I got it free from a friend. They seem to be a lot quieter(ticking) than the 460 RX7 injectors I had before.