Standalone Blinkers/brake lights help
09-02-2015, 08:55 PM
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Chicago, IL
Posts: 10,454
Total Cats: 1,799
Standalone Blinkers/brake lights help
Hello folks, as of recent i got a second vehicle that needs a lot of work. This may not be a miata directly but its similar.
I'm looking to add blinkers and brake lights to a vehicle that doesnt have them. Anyone has any experience with what i need to buy?
I'm looking to add blinkers and brake lights to a vehicle that doesnt have them. Anyone has any experience with what i need to buy?
Reply
0
0
09-02-2015, 09:04 PM
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
There are loads of universal turn signal switches out there. Google "universal turn signal switch"
As for brake lights, a lot of vehicles (including VW Beetles) used to use pressure switches attached to the brake line to actuate the lights. You can find these cheaply and plentifully in the aftermarket with just a Google search as well, and this will probably be easier to implement than a plunger switch on the pedal.
Examples:
JEGS Hydraulic Brake Light Switch |
http://www.summitracing.com/parts/PRF-80174/
As for brake lights, a lot of vehicles (including VW Beetles) used to use pressure switches attached to the brake line to actuate the lights. You can find these cheaply and plentifully in the aftermarket with just a Google search as well, and this will probably be easier to implement than a plunger switch on the pedal.
Examples:
JEGS Hydraulic Brake Light Switch |
http://www.summitracing.com/parts/PRF-80174/
Reply
0
0
09-02-2015, 10:01 PM
#5
Elite Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Chicago, IL
Posts: 10,454
Total Cats: 1,799
How about these? Would the pressure switch go where the "stoplight" is and then to 12v?
Universal Turn Signal Switch | 7-wire unit for vehicles with combination stop and turn signal lamps requiring brake light circuit.
Universal Turn Signal Switch | 7-wire unit for vehicles with combination stop and turn signal lamps requiring brake light circuit.
Reply
0
0
09-02-2015, 11:00 PM
#8
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
Reply
0
0
09-03-2015, 08:50 AM
#10
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
No, there are several basic types, mostly differentiated by whether they have two, three or four terminals. But since you're doing this from scratch, any one that works with LEDs can be wired in.
The place you linked to earlier sells this one: LED Flasher - Electronic flasher for LED lights
The place you linked to earlier sells this one: LED Flasher - Electronic flasher for LED lights
Reply
0
0
09-03-2015, 01:25 PM
#12
Elite Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Chicago, IL
Posts: 10,454
Total Cats: 1,799
Ah, one more question, do i need relays for the blinkers/tails or do i just run the wires directly from the universal switch i posted above? In the pic i dont see relays but i'm not sure. Thanks
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
