scottv

iTrader: (3)

Since I have power steering and AC, it's going to be tight getting my intercooler pipe down the hot side, so figured I would get rid of all that metal radiator hose with two rubber hoses connected to the lower radiator and go with a flexible stainless braided of some sort...any recommendations? Also, anyone happen to know the diameter of the connections offhand? Thanks.

was thinking about something like this:
http://store.summitracing.com/partde...5&autoview=sku

paul

iTrader: (21)

begi makes a niece piece to get around that stuff.

Braineack

iTrader: (62)

Use this NAPA hose:




ok...now back to my sexually demanding wife.

levnubhin

iTrader: (30)

+1, just go to your local parts store and get a rubber flex hose.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

scottv

iTrader: (3)

Nice, thanks!

kotomile

iTrader: (24)

Ben happened across an NB lower hose that looked like it would work nicely.

Trent

iTrader: (11)

+2. That's what I did.

scottv

iTrader: (3)

Thanks...I went to Advance Auto and bought a $12 flex hose like the one pictured above: 1.25" X 20" fit PERFECT...I did use some worm clamps on it instead of the stock spring clamps just because I didn't want to chance the spring clamps being tight enough.

poobs

iTrader: (1)

Are you guys replacing the entire lower hose - two hoses and solid metal pipe section ?

levnubhin

iTrader: (30)

Yes, ditch the 2 hoses and metal pipe and put in the flex hose.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

poobs

iTrader: (1)

Cool! That is a good option !

Gotpsi?

iTrader: (5)

I know this is an ugly pic, but its the only one I have of the hose, its my upper, but you can cut them to any length and its working very well for me. I got it from summit, I believe its stainless steel.

[IMG][/IMG]

falcon

iTrader: (13)

The one issue with piping like that, is it's going to be a bitch to bleed all the air out. I would personally use smooth piping as much as possible. Go get a AN fitting welded onto your radiator and run a big -6 line or something.

viperormiata

iTrader: (24)

When I switched to bigger intercooler pipes, I needed more space.

So I got one of the FM lower silicone hoses

poobs

iTrader: (1)

Yeah I want that hose too but I also want to try the Gates
Flex-Form FF251 to see if it fits and is cheaper

Gotpsi?

iTrader: (5)

-6 is smaller than an oil cooler line

viperormiata

iTrader: (24)

I was skeptical at first but the form/fitment is flawless and it's only 40 bucks.

Plus it looks really clean down there next to all my dirty ****, lol.