anybody familiar with this LC-1 problem?
02-06-2008, 08:22 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: North Jersey
Posts: 717
Total Cats: 0
anybody familiar with this LC-1 problem?
-i have a LC-1 controller hooked up to their digital gauge (no MS).
-O2 sensor is roughly 3 ft from turbo and in the 12 o'clock position.
-gauge readings will appear to be correct for about an hr of driving and then they go to ****.
-it will read 22.4 continuously......occasionally blip reading 7.4 (under WOT or decel.....i forget which).
-the LED is not flashing any error code.
sound familiar to anyone?
do you need more info?
-O2 sensor is roughly 3 ft from turbo and in the 12 o'clock position.
-gauge readings will appear to be correct for about an hr of driving and then they go to ****.
-it will read 22.4 continuously......occasionally blip reading 7.4 (under WOT or decel.....i forget which).
-the LED is not flashing any error code.
sound familiar to anyone?
do you need more info?
Last edited by olderguy; 02-06-2008 at 08:27 PM. Reason: Clock is upside down? Said 6 O'clock
Reply
0
0
overheat
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
