DrewLGT

iTrader: (1)

i'm finishing up swapping a protege 1.8 into my 93. the plug wires off my 93 were too short, i assumed because of the difference in bore spacing between the 1.6 and 1.8. so i bought a set of wires for a 95 miata, and those too were too short.

i think my next step is going to be to get a set of wires for a 93 or so protege. they had a distributor instead of a coil pack, so the wire needed to go a little further to reach around to the back...


anyone have advice before i buy another set of wires on an assumption?

Doppelgänger

iTrader: (12)

Buy a new set of 1.8L wires? I've had several sets of NAPA/AutoZone wires and they all seem to have plenty of slack

18psi

iTrader: (76)

get COPS

make the length whatever you want

DrewLGT

iTrader: (1)

reading comprehension > you


i did buy a set of 1.8 wires. too short

DrewLGT

iTrader: (1)

one step at a time....


COPS are on the distant horizon

Doppelgänger

iTrader: (12)

Try another set. Thay're not all made the same. I know for a fact the NGKs are rather short. Cockmaster.
Maybe you can unbolt the coil-pack and attach it somewhere else?

DrewLGT

iTrader: (1)

i'm just going to go with the ngk protegay wires.



i have a buddy with a turbo protege, i'm going to try to get him over here to test fit his first.