Front coolant temp sensor thread pitch question
#1
Elite Member
Thread Starter
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
Front coolant temp sensor thread pitch question
Searched over @ m.net and couldnt find it, google showed nothing either.
Anyone know what the thread pitch on the 1.6l front temp sensor is? Im looking to tap my front block off plate from begis coolant re route.
Anyone know what the thread pitch on the 1.6l front temp sensor is? Im looking to tap my front block off plate from begis coolant re route.
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
Searching revealed this: https://www.miataturbo.net/forum/t17819/ which suggests that it's 16 x 1.5mm.
Unfortunately, it also revealed this: https://www.miataturbo.net/forum/t21405/ which says that a 14 x 1.5mm plug fits in the hole, but that it's "not exact."
Probably one of those two, at any rate.
Unfortunately, it also revealed this: https://www.miataturbo.net/forum/t21405/ which says that a 14 x 1.5mm plug fits in the hole, but that it's "not exact."
Probably one of those two, at any rate.
Thread
Thread Starter
Forum
Replies
Last Post