Someone please check my 94-95 pinouts
#1
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
Someone please check my 94-95 pinouts
I wanted to verify my 94-95 pinouts before I finalized the harness I'm building for some of you peeps.
There is absolutely no pinouts for the 94-95 like the 1.6L so I had to use my nogin. If anyone else out there has one can you verify I have mine correct? I'm 95% sure it's correct, but ya never know.
The Madricki diagrams are usless, so don't refer them to me
There is absolutely no pinouts for the 94-95 like the 1.6L so I had to use my nogin. If anyone else out there has one can you verify I have mine correct? I'm 95% sure it's correct, but ya never know.
The Madricki diagrams are usless, so don't refer them to me
#5
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,543
Total Cats: 4
i wish i could help scott, but im gonna use your 90-93 diagram in the next week or two since its far more easy to read compared to the madracki wiring diagrams.
Maybe we could change the title and make this a sticky once we verify the pinout and later add more stuff
Maybe we could change the title and make this a sticky once we verify the pinout and later add more stuff
#7
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
however i did label the number of the pins wrong on the db37 harness. the shield is on 2 and orange on 20.
i spent a good amount of time tracing all the damn leads on the Madracki diagarms and everything seems kosher for the 94-95.
The 1.6L is 100% correct. I perfer it in this fashion compare to just a spreadsheet of all the pinouts, which I also have. It's a lot easier to just match colors with pin positions. I did go to art school, so it's just me.
#8
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
ok looks like the i confused the 5vref with the Tps signal, so tps should be on 2M, the rest looks good. I'll correct it tomorrow. good night.
gotta finish my 3 remaining megasquirt and send them bitches out.
gotta finish my 3 remaining megasquirt and send them bitches out.
#11
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
hahah no i forgot to change the name label.
i have a wiring diagram, but the thing sucks ***. I just wanted to see if anyone had a simple pinout like:
2N - Red/BlU - o2
2M - Blu/Wht - TPS
but since I can only have mine for a 90-93 and one for a 96-97 and a 1999, i was hoping someone had one for a 94-95, which doesn't seem to exist.
but the only real difference is that the 1.6 has injectors 1,3 and 2,4 combined, where the 94-95 has them all seperated and then the fuel pump is activated through the harness, which the 1.6L isn't the rest is the same.
I'll have everyone's MS out this week. btw.
i have a wiring diagram, but the thing sucks ***. I just wanted to see if anyone had a simple pinout like:
2N - Red/BlU - o2
2M - Blu/Wht - TPS
but since I can only have mine for a 90-93 and one for a 96-97 and a 1999, i was hoping someone had one for a 94-95, which doesn't seem to exist.
but the only real difference is that the 1.6 has injectors 1,3 and 2,4 combined, where the 94-95 has them all seperated and then the fuel pump is activated through the harness, which the 1.6L isn't the rest is the same.
I'll have everyone's MS out this week. btw.
Thread
Thread Starter
Forum
Replies
Last Post