Picking the right injectors..
#1
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
Picking the right injectors..
I am running low Z RC550s at the moment, so I re wired the harness to include a set of Dale 10ohm resistors when they went in. Turns out the 550s aren't quite big enough for my needs, so I am looking into a new set of injectors. I am fairly sure that I am going with a set of RC750s, but those are available in both saturated and peak and hold (I always thought RC didn't make any saturated injectors over 550cc). My question is, am I better off running another set of larger peak and holds with my resistor pack like I am now, or can I just go with a set of saturated high Z injectors and return the harness to stock? The only reason that I am running low Z 550s right now is because they were available local for a good price at the time.
#5
Senior Member
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: South Eastern Wisconsin
Posts: 1,274
Total Cats: 0
I don't really have a HP goal, and I have never made it to a dyno. I would be happy with anything over 300, and I would like to SOME DAY make an 11.X pass.. But for now I am just trying to get deeper into the 12s.
#10
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
Could this be any simpler?
http://www.jbperf.com/p&h_board/index.html
C'mon, it's the right way and you know it.
http://www.jbperf.com/p&h_board/index.html
C'mon, it's the right way and you know it.
Thread
Thread Starter
Forum
Replies
Last Post
chris101
Miata parts for sale/trade
2
10-09-2015 09:08 AM