Miata Turbo keychain
#22
Or.. did you guys want something simpler like this (Let's call this "Design B")
I can make the lettering raised or cut out.
According to shapeways that's actually cheaper, a little over $10 / unit..
I need feedback guys!
Shapeways | Miata Turbo Keychain - Design B
I can make the lettering raised or cut out.
According to shapeways that's actually cheaper, a little over $10 / unit..
I need feedback guys!
Shapeways | Miata Turbo Keychain - Design B
I like the debossed design B!
#30
I just want you guys to know: You can go to that link and buy either one today
I'll still be working on improvements, but once it's up there, you can get it... The only 'benefit' i can offer is to buy a few of the cheaper ($10) ones together and then re-ship them to you, so you dont' have to pay the $25 minimum to the site..
I'll still be working on improvements, but once it's up there, you can get it... The only 'benefit' i can offer is to buy a few of the cheaper ($10) ones together and then re-ship them to you, so you dont' have to pay the $25 minimum to the site..
#32
OK let me get back to it tonight, i'll fix the points above (move the hole in a little, fix the O to be a turbo).. I also have a similar style bottle opener here (at work) so i'll take that home and measure it to make sure the one i'm making should also actually be functional too
No guarantees that the metal won't break.. I just want to be clear on that.. i've never worked with metal w/this company before.
No guarantees that the metal won't break.. I just want to be clear on that.. i've never worked with metal w/this company before.
#36
you guys are scaring me.
Ben, triple88a -- the only problem i see with this suggestion is that if the keychain is designed as sunken and not raised, then the raised part of the "O" in turbo is the center, not the letter itself.. so if i cut that part out, it may look a little confusing.
I think for now i'll keep the keyring hole on the other side (i've just extended the whole thing by a few mm).
PLEASE GIVE ME A CONSENSUS: Should the "O" just be stylized like in the mt.net logo above, or should it try to more faithfully look like a relief of an actual turbo? (turbine fins inside, round housing & in/outlets vs. flat surface etc).
Ben, triple88a -- the only problem i see with this suggestion is that if the keychain is designed as sunken and not raised, then the raised part of the "O" in turbo is the center, not the letter itself.. so if i cut that part out, it may look a little confusing.
I think for now i'll keep the keyring hole on the other side (i've just extended the whole thing by a few mm).
PLEASE GIVE ME A CONSENSUS: Should the "O" just be stylized like in the mt.net logo above, or should it try to more faithfully look like a relief of an actual turbo? (turbine fins inside, round housing & in/outlets vs. flat surface etc).