Zaphod

Hi guys,

I'm just about to install the Zeitronix in my 1998 1,6. Where can I connect the boost sensor to, other than the connector next to the throttle body. (I have my analog boost gauge and the BOV already tapped into that line.

Are there other connectors on the 1,6 (at the 1,8 there are much more).

Thanks,

Mimime

iTrader: (1)

Are you talking about Vaccum source?

There is an open source at the intake manifold, cloest to the firewall. A black nip is attached.

Zaphod

Exactly what I was looking for. Thanks, and please excuse the difficulties I have, to describe such a thing in English. But in Germany there are not so many boosted MX-5/Miata.


Edit: Well... this vacuum source isn't there at the nb manifolds... but i found another one one the opposite side off the manifold next to the throttle body.

Thanks.

Zarniwoop42

iTrader: (1)

not realy relvent to the topic of your thread, but
word up to the guide

cardriverx

iTrader: (12)

you could always use a T connector and splice into the boost gauge line.

Zaphod

Well I just removed my charcoal canister to get a free port and did some sensibel t-fitting of all the lines.

So - "No panic"

Greets