thirdgen

iTrader: (26)

I may have asked this before, but I can't find any old threads. The question is simple. If I take my LC-1 controller, disconnect the sensor, then move everything to another vehicle...Will it keep the calibration and all the settings I put on there before? Or will I have to redo calibration and everything all over again?

richyvrlimited

iTrader: (1)

Yes it will retain it's settings.

When you connect it up there's no requirement for a permanent 12v feed, merely one supplied once the ignition is turned on.

So when the ignition is off, it's effectively unplugged and in a box somewhere in your cupboard.

That said there's no harm whatsoever in performing a new calibration.

Braineack

iTrader: (62)

the sensor must be plugged in before power up.

richyvrlimited

iTrader: (1)

Yeah that, otherwise it'll need re-calibrating, and you never want the sensor in the exhaust stream in a running engine whilst unplugged

Braineack

iTrader: (62)

well it will automatically recalibrate if it's ever powered up without a sensor and then one is connected. and it will screw up if it's not done correctly in free air and then the warmup calibration will also be screwed.

thirdgen

iTrader: (26)

You're saying that if I move it and plug everything back in the way it was before I power it up though, it'll be ok. Awesome.