SuperTuner12010

iTrader: (2)

Does anybody have a color coded pinout for a 1.8l na miata. More so a 94? Need this asap please, I need to do jumper the pins to set idle and do my timing. Right now the pins are all sittign outdise the connector.

I ahve found the 90-93 color coded pinout and the nb pinout. But the diagram that shows the pins for the 1.8l na doesn't have the colors.

1.6l na and nb:




The 1.8l na without colors:

Joe Perez

iTrader: (8)

I don't have the whole diagram in front of me right now (it's at home in book form) but I can tell you that TEN is the green / yellow wire, same as on the '90-'93. I would wager that, insofar as comperably-colored wires exist between your chassis and the documentaion you have for the 1.6, they're going to be pretty much identical. Very little changed between '90 and early '95. Ignore the '99+ documentation- the NB is a completely different car in terms of the electrical system.

Braineack

iTrader: (62)

all the same colors in terms of function to the 94/95. so touch the green/yellow to the chasis.

nice to see my diagrams put to somewhat of use.

SuperTuner12010

iTrader: (2)

Thanks for that info guys, I only have access to the crappy wiring diagrams that are avaliable online. I really wish I had the in dpth book.

Well at least I can get the car setup properly. I also know the solid green is for the fuel pump.

I also believe the black/white is for the tachometer. Thats pretty much all I could gather from the online diagrams.