General Miata Chat A place to talk about anything Miata

Engine blown?

Thread Tools
 
Search this Thread
 
Old 08-20-2008, 10:42 PM
  #1  
Junior Member
Thread Starter
 
FASTERTHANYOU's Avatar
 
Join Date: Apr 2007
Posts: 80
Total Cats: 0
Default Engine blown?

yesterday i went to the drag strip, I pulled a couple runs and i was pinging
on the way back home on the highway i was in full boost and all of a sudden i see this heavy white smoke coming out of the engine bay, so i pull over to check it out. I could not see where the oil came from, its everywhere , i lost about a liter.
I noticed the dipstick was out, could the oil come out from there?
did i blow something else?

The car starts, i even drove it home after i topped off the oil.
FASTERTHANYOU is offline  
Old 08-20-2008, 10:51 PM
  #2  
Elite Member
iTrader: (21)
 
paul's Avatar
 
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
Default

you pressurized the crank case. either by bad rings or bad valve seals or bad pcv valve or a combination of those.
paul is offline  
Old 08-20-2008, 10:54 PM
  #3  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,297
Total Cats: 476
Default

+1 Have a leakdown test performed to properly diagnose the engine's leakage.
patsmx5 is offline  
Old 08-20-2008, 11:00 PM
  #4  
Elite Member
iTrader: (8)
 
Toddcod's Avatar
 
Join Date: Oct 2007
Location: Dallas
Posts: 1,829
Total Cats: 0
Default

Does the car still ping or knock? Did it quit smoking? Is it missing? If not you are probably ok.

You have to check for leaks to see if you blew something else. I've heard of people loosing oil that way. But I have had my car blow oil out the filter on the valve cover. It blew oil straight onto the exaust and smoked like a chimney.
If it blew you would know it. I wouldn't drive it pinging. I would tow it before I blew it.

I use a 323 turbo pcv valve on my car. If you don't have one you can pick one up.
Toddcod is offline  
Old 08-20-2008, 11:43 PM
  #5  
Junior Member
 
Mouglie's Avatar
 
Join Date: Aug 2005
Location: Iowa
Posts: 338
Total Cats: 0
Default

you may have to change your screen name...
Mouglie is offline  
Old 08-21-2008, 01:41 AM
  #6  
Junior Member
Thread Starter
 
FASTERTHANYOU's Avatar
 
Join Date: Apr 2007
Posts: 80
Total Cats: 0
Default

Originally Posted by Toddcod
Does the car still ping or knock? Did it quit smoking? Is it missing? If not you are probably ok.

You have to check for leaks to see if you blew something else. I've heard of people loosing oil that way. But I have had my car blow oil out the filter on the valve cover. It blew oil straight onto the exaust and smoked like a chimney.
If it blew you would know it. I wouldn't drive it pinging. I would tow it before I blew it.

I use a 323 turbo pcv valve on my car. If you don't have one you can pick one up.
It doesnt ping anymore since i lowered the boost,it dosnt smoke either, the smoke was just from oil on the manifold
FASTERTHANYOU is offline  
Old 08-21-2008, 02:55 AM
  #7  
Elite Member
iTrader: (1)
 
KPLAFIN's Avatar
 
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
Default

Originally Posted by Mouglie
you may have to change your screen name...
Look who's talking....maybe he should try some head gasket stop leak in the oil to stop the leak

EDIT: OP, If you haven't been around long enough to get that little joke, do not try head gasket stop leak in the oil....it doesn't work...mouglie can vouch.
KPLAFIN is offline  
Old 08-21-2008, 09:23 PM
  #8  
Newb
 
NBdriftpilot's Avatar
 
Join Date: Aug 2008
Location: ABERDEEN MD
Posts: 11
Total Cats: 0
Default

i had same thing happen not in my miata though bad rings and bad pcv and also partly my fault i had pulled the dip stick tube out and lost the 0-ring and installed it without it
NBdriftpilot is offline  
Old 08-21-2008, 10:47 PM
  #9  
Junior Member
 
Mouglie's Avatar
 
Join Date: Aug 2005
Location: Iowa
Posts: 338
Total Cats: 0
Default

Originally Posted by KPLAFIN
Look who's talking....maybe he should try some head gasket stop leak in the oil to stop the leak

EDIT: OP, If you haven't been around long enough to get that little joke, do not try head gasket stop leak in the oil....it doesn't work...mouglie can vouch.
hahaa, i'm just kidding yo!

good luck with your car aigh...
Mouglie is offline  
Old 08-21-2008, 11:07 PM
  #10  
Senior Member
 
oilstain's Avatar
 
Join Date: Jul 2008
Location: Phoenix
Posts: 809
Total Cats: 67
Default

Fail:
oilstain is offline  
Old 08-23-2008, 10:55 PM
  #11  
Junior Member
Thread Starter
 
FASTERTHANYOU's Avatar
 
Join Date: Apr 2007
Posts: 80
Total Cats: 0
Default

update: I drove my car today for the first time since, it misses, its drinking oil like crazy, and theres exhaust fumes coming from the valve cover
headgasket?

Last edited by FASTERTHANYOU; 08-24-2008 at 02:25 AM.
FASTERTHANYOU is offline  
Old 08-24-2008, 09:43 AM
  #12  
AFM Crusader
iTrader: (19)
 
olderguy's Avatar
 
Join Date: Oct 2004
Location: Wayne, NJ
Posts: 4,667
Total Cats: 337
Default

Do a compression and leakdown test before pulling it apart. You could have more than one problem.
olderguy is offline  
Old 08-24-2008, 10:42 AM
  #13  
Senior Member
iTrader: (5)
 
urgaynknowit's Avatar
 
Join Date: Dec 2007
Location: worcester ma
Posts: 1,116
Total Cats: 0
Default

""on the way back home on the highway i was in full boost and all of a sudden i see this heavy white smoke coming out of the engine bay,""

white smoke = coolant

""I could not see where the oil came from, its everywhere""

wow lol

check the pcv, see if u grenaded it, im guessing head gasket if the car still ran but shitty. i pressurized the crankcase on my old red one, and that wasnt pretty. Oil ******* came out of everywhere. It was like hey im from the wood work and id like to cover your engine bay. However, i only did it at like one psi and let off quickly when i saw the oil pressure jump and felt the car stumble. That one psi covered my motor bay with oil very quickly, it came out of gaskets and everything, dip stick popped and all. But this was like a half a second mistake. Im assuming that if u held it for longer, you would see all kinds of fun things. Check your compression, and do a leak down. This will at least tell you where to start on your problem.

pictures say a endless words

-kamil

Last edited by urgaynknowit; 08-24-2008 at 08:47 PM.
urgaynknowit is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
04-12-2021 04:21 PM
90 Turbo
MEGAsquirt
19
10-19-2015 03:23 PM
tazswing
Race Prep
20
10-03-2015 11:04 AM
Voltwings
Cars for sale/trade
0
09-27-2015 06:40 PM
kr307
Meet and Greet
1
09-26-2015 10:33 AM



Quick Reply: Engine blown?



All times are GMT -4. The time now is 12:28 AM.