I've awaken the BEAST!!!!
#1
I've awaken the BEAST!!!!
Holy ****.....
My motor sounds BADASSSSSSSSS!!!!!!
I just started it for the first time, and the 260deg cams are pretty damn loppy, I can't stop laughing. I am gonna try to get a camera with a decent sound so you all can hear it.
For those of you that aren't familiar with the build......go **** yourselves :P
Seriously though, it has the following:
-MiataRoadster.com billet oil pump gears
-8.5:1 wiseco pistons
-Belfab (949Racing, take your pick...) Rods
-My own custom headwork (see results in braineacks dyno thread)
-Coated pistons, coated chambers, coated exhaust ports
-Custom ground cams from Integral cams, 263dur/9.8mm lift
-Shim under bucket solid lifter conversion
-Complete supertech valvetrain
and a bunch of other **** I'm sure I spent a fortune on...
Anyways, I also got a new job recently that pays like 3x what I'm currently making. For those also familiar with my inability to decide and keep what turbo I want to run will be happy to know that I will finally be able to afford to get the gt2871r or gt3071r that I really want!
Someone smack this smile off my face!
Brian
My motor sounds BADASSSSSSSSS!!!!!!
I just started it for the first time, and the 260deg cams are pretty damn loppy, I can't stop laughing. I am gonna try to get a camera with a decent sound so you all can hear it.
For those of you that aren't familiar with the build......go **** yourselves :P
Seriously though, it has the following:
-MiataRoadster.com billet oil pump gears
-8.5:1 wiseco pistons
-Belfab (949Racing, take your pick...) Rods
-My own custom headwork (see results in braineacks dyno thread)
-Coated pistons, coated chambers, coated exhaust ports
-Custom ground cams from Integral cams, 263dur/9.8mm lift
-Shim under bucket solid lifter conversion
-Complete supertech valvetrain
and a bunch of other **** I'm sure I spent a fortune on...
Anyways, I also got a new job recently that pays like 3x what I'm currently making. For those also familiar with my inability to decide and keep what turbo I want to run will be happy to know that I will finally be able to afford to get the gt2871r or gt3071r that I really want!
Someone smack this smile off my face!
Brian
#12
I'm Miserable!
iTrader: (5)
Join Date: Dec 2006
Location: jacksonville, fl
Posts: 1,711
Total Cats: -1
Also, question....
Would a loppy idle cause the oil pressure gauge to wiggle very slightly, constantly? I hear no ping at all, I'm getting 13.3afr, and the motor runs great otherwise. Actually all the needles are vibrating a little.....ground maybe?
EDIT: I also have mmr mounts installed.
Would a loppy idle cause the oil pressure gauge to wiggle very slightly, constantly? I hear no ping at all, I'm getting 13.3afr, and the motor runs great otherwise. Actually all the needles are vibrating a little.....ground maybe?
EDIT: I also have mmr mounts installed.
#18
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
schweeeeeeeeeeeeeeet brian. i want this kind of awesome in my car fast.
one of you guys send me the phone vid and i'll upload it to youtube.
edit: did you get my email about the gasket? I can paypal whenever.
one of you guys send me the phone vid and i'll upload it to youtube.
edit: did you get my email about the gasket? I can paypal whenever.