A new fastback top coming to the Miata market....
12-21-2010, 12:52 PM
#81
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
I actually really like the one brain posted. Wasn't so sure about it in the beginning, but that is growing on me. GJ Brainysack.
Is it just me or does it still look a little funky where it connects to the windshield?
Is it just me or does it still look a little funky where it connects to the windshield?
0
12-21-2010, 12:53 PM
#82
Elite Member
Thread Starter
iTrader: (12)
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 6,850
Total Cats: 71
The BMW top cut follows the exact same slope at the original concept 
I just put them over eachother and switched the image about 500 times 
The thing that makes it look like it's not is the upper window line of the side window (it's straight on Scott's)
I just put them over eachother and switched the image about 500 times The thing that makes it look like it's not is the upper window line of the side window (it's straight on Scott's)
0
12-21-2010, 01:11 PM
#83
Junior Member
Join Date: Dec 2010
Posts: 90
Total Cats: 0
The real thing is a dead on copy of the OEM top until you get to about where a rollbar would be.
0
12-21-2010, 01:40 PM
#85
WTF!! I've been so good about not spending any unnecessary money on the miata in the past year, and here you guys are, teasing me and making me want one.
So I've skimmed through the thread (mainly the last 2 pages), so forgive me if it was mentioned or is considered common sense with these fastbacks. This will pretty much take away the ability to drop the top correct? Or at least without having to swap trunks I assume.
Maybe I'll have to treat myself to a present this spring.
So I've skimmed through the thread (mainly the last 2 pages), so forgive me if it was mentioned or is considered common sense with these fastbacks. This will pretty much take away the ability to drop the top correct? Or at least without having to swap trunks I assume.
Maybe I'll have to treat myself to a present this spring.
0
12-21-2010, 01:55 PM
#87
Junior Member
Join Date: Dec 2010
Posts: 90
Total Cats: 0
So I've skimmed through the thread (mainly the last 2 pages), so forgive me if it was mentioned or is considered common sense with these fastbacks. This will pretty much take away the ability to drop the top correct? Or at least without having to swap trunks I assume.
Maybe I'll have to treat myself to a present this spring.
0
12-21-2010, 03:20 PM
#89
Junior Member
Join Date: Oct 2010
Location: Central Florida, Land of the Giant Rat.
Posts: 122
Total Cats: 2
Lol! I had to look that up! I'm more about Cisitalia than Porsche. Think '50 202... I see why Porsche did the roof that way though.
Either way, what I was doing was just a styling exercise, nothing more.
None of this 'you should', 'you ought to' crap. I don't operate that way. Just throwin' it out there. Dopple got what I was doing. For fun.
Besides, my l'il rendering would be a pita to produce a backlight for...
It'd be a huge compound curve of glass that would require a structure for hinging, which would not be at the 'top' but more like in the top third of the 'hatch'.
It's also tough to do 'chops with peebucket, considering I don't have P-shop.
Either way, what I was doing was just a styling exercise, nothing more.
None of this 'you should', 'you ought to' crap. I don't operate that way. Just throwin' it out there. Dopple got what I was doing. For fun.
Besides, my l'il rendering would be a pita to produce a backlight for...
It'd be a huge compound curve of glass that would require a structure for hinging, which would not be at the 'top' but more like in the top third of the 'hatch'.
It's also tough to do 'chops with peebucket, considering I don't have P-shop.
0
12-21-2010, 07:06 PM
#91
Here is a dumb idea but I wanted to put it out there. Find a back and side glass off of an existing auto that you can use as a donor and design around that. I prefer one that already has defroster built in. Perhaps an older RX?
Unless I am mistaken, there are many sources for replacement glass for autos that have been discontinued for years. Some may want Lexan for weight, but as a daily driver I would prefer glass.
Unless I am mistaken, there are many sources for replacement glass for autos that have been discontinued for years. Some may want Lexan for weight, but as a daily driver I would prefer glass.
0
12-21-2010, 07:43 PM
#92
Junior Member
Join Date: Dec 2010
Posts: 90
Total Cats: 0
We have always kept the option open to adapt the design to use OEM glass, as long as it is relatively cheap and easy to get. We could possibly make another mold down the road that uses OEM glass and leave it to the customer to buy the glass.... but dont hold your breath... ducktail spoiler options, an NA and an NC versions take priority. Maybe we'll make the NC version to use OEM glass right off the bat.
0
12-22-2010, 07:00 AM
#93
already having a hardtop I dont think I would go for this, it is actually looking nice though, but a question about mounting hardware. Would it:
0
12-22-2010, 09:05 AM
#94
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
this is about the best I could come up with an NA. The body lines just don't work with a fastback compared to the NB as far as I'm concerned.
even the coupe from that factory looked odd:
where the nb looks hawt:
even the coupe from that factory looked odd:
where the nb looks hawt:
0
01-07-2011, 05:59 AM
#98
Newb
Join Date: Jan 2011
Posts: 11
Total Cats: 0
hi ppl new to this forum, seen the picks on the fastback idea
Its a bit so so, but what do you think...
Its a bit so so, but what do you think...
Last edited by HBC; 01-07-2011 at 06:26 AM. Reason: made mistake
0
