silverhair

Anyone have a good source for an ACT clutch?

How much spinning will a stock clutch take!

Al Hounos

prostreetonline.com

samnavy

iTrader: (7)

Silverhair, welcome to the forum. Please view this short video to help you out in the future.
http://www.albinoblacksheep.com/flash/posting.php

miatamania

iTrader: (9)

www.carolinaclutch.com are good guys. They had free shipping but since I live right down the road I bought everything from them

hustler

iTrader: (6)

hey, does anyone know if you can put a turbo in a miata?

samnavy

iTrader: (7)

I heard only the factory rotary engined Miatas can be turbo'd.

rotaryjunky

iTrader: (3)

That's right, but the head gasket will fail with over 20psi.

I have bought clutches on ebay with good luck, but they were really cheap oems for crap cars.
94+ or use with a 1.8 flywheel
http://cgi.ebay.com/ebaymotors/ACT-C...QQcmdZViewItem

silverhair

Thanks for the suggestions, .....for the vendors anyway! I had found one in another thread, but not the other.

Has anyone tried the HD plate with springs and one with 6 pucks? What is the difference at 6-12psi?


I heard you could only use a turbo which spins anti-clockwise

Braineack

iTrader: (62)

an ACT HD 6 or 4 puck clutch will hold a bit more TQ than the street disc, however they aren't as fun to engage in stop & go traffic.

silverhair

I am already battling idle droop in stop go traffic, so dont need anymore hastle there. Better go with the springs I quess.

I have a stock ecu with a voodoo box. It idles well if I bring the rpms down slowly, like on overrun, but if I suprise it, it goes rich and sticks at 500 rpm.

magnamx-5

iTrader: (7)

the Idle drop is not normal, have you tweaked the voodoo leaner at least it is hitting 500 rpm and not dying i think of idle droop as dieing and not just low RPm idle.