Cylinder 2 and 4 not firing
05-31-2014, 09:20 PM
#1
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
Cylinder 2 and 4 not firing
All of a sudden the car is running on two cylinders. There is spark but apparently no fuel. I did a little digging and it was recommended that reflashing the ECU may help the issue. I went ahead and reflashed it and the issue persists. Help I have to go to work in the morning 
Reply
0
0
06-01-2014, 05:28 PM
#8
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
Sorry I misread. I don't have anything sequential... that I know of. I thought MS1 wasn't capable of that. I checked the wiring harness and all seems fine. I opened MS and didn't see anything out of place.
Reply
0
0
06-02-2014, 04:00 PM
#9
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
I inspected the injector to make sure that they were not firing. I switched 1 with 2 and 3 with 4 to check if they were stuck and they are not. All for injector can squirt. I then checked the voltage at the harness and all 4 clips showed 12v with the ignition on. Then I cleaned the grounds under the brake booster and #2 and #4 still won't fire.
Is MS not grounding the injectors? or am I missing something?
Is MS not grounding the injectors? or am I missing something?
Reply
0
0
06-02-2014, 06:03 PM
#11
Elite Member
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Michigan
Posts: 5,609
Total Cats: 13
So I just discovered the harness has a cable that came apart from the pin.
I've looked for the harness diagrams but it seems that the site hosting the images is no longer up and couldn't find anything that could guide me.
I looks like it belongs to this pin (there seems to be some solder residue)
Do you have a wiring diagram?
I've looked for the harness diagrams but it seems that the site hosting the images is no longer up and couldn't find anything that could guide me.
I looks like it belongs to this pin (there seems to be some solder residue)
Do you have a wiring diagram?
Reply
0
0
06-02-2014, 07:20 PM
#12
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
So I just discovered the harness has a cable that came apart from the pin.
I've looked for the harness diagrams but it seems that the site hosting the images is no longer up and couldn't find anything that could guide me.
I looks like it belongs to this pin (there seems to be some solder residue)
Do you have a wiring diagram?
I've looked for the harness diagrams but it seems that the site hosting the images is no longer up and couldn't find anything that could guide me.
I looks like it belongs to this pin (there seems to be some solder residue)
Do you have a wiring diagram?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
