Rushin

iTrader: (3)

Before




Right light is already done in this picture.


Close up of the shaved light


I kind of like the mate look

UrbanSoot

iTrader: (24)

what did you use to do it?

JDMAflac

iTrader: (1)

^ x2

Rushin

iTrader: (3)

200 grid just on the letters then 400 on the entire light, then 600 then 1200 and after that 2000. All wet sanding. After that i used head light polishing compound from 3M. Light on the right was hand polished and on the left i used a small orbital polisher. Took 20 min on both lights

p51hellfire

iTrader: (28)

Now whats the paint to tint them called?.....

Rushin

iTrader: (3)

dont want to tint them actually.

Trent

iTrader: (11)

looks good. now do your cyclops light and all your marker lights.

kenzo42

iTrader: (6)

Will you need to repolish these lights repeatedly and indefinitely to keep the shine?

Rushin

iTrader: (3)

I will do the third break light. Not sure about the sidemarkers tho.

No you dont have to repolish them.

p51hellfire

iTrader: (28)

cueball1

iTrader: (13)

I did that a year or so ago all around the car, fronts, rears, side markers, etc. Started with 400 wet and a block then worked finer. By being careful taking down the letters I skipped a couple of grades that Rushin used. Haven't had to refinish or re-polish in any way. It's a small thing but it sure looks cleaner without the lettering gathering crud all the time and it's just a couple hour project.

RotorNutFD3S

iTrader: (33)

VHT Nite Shades