blaen99

iTrader: (6)

Dear MT.net,

I am looking into purchasing a nice, shiny new rollbar in the next few days. I am leaning towards a Boss Frog Clearview Maxx because I've read some glowing (but older) reviews on it.

Talk me out of it. It's the most expensive rollbar of all of them I looked at when everything is included (padding, cover, etc.), but seems to be the best fit rollbar for a DD considering it's got full mirror and rear visibility.

Big pros: Cheaper. I like cheaper a lot. But I like my rear view for potential DD purposes a lot more than cheaper.

curly

iTrader: (25)

My hard dog double diagonal is easily dd'able. Just in case that was keeping you away. It's been years since I've looked into roll bars, bought mine used, so otherwise I'm no help.

blaen99

iTrader: (6)

How tall are you, Curly? Foamectomy/other height mods?

curly

iTrader: (25)

5'10. The rear foam is removed, but the bottom is stock. I need a foamectomy for head room though. Obviously the race seat is bolted to the floor.

blaen99

iTrader: (6)

I'm fuxt with that bar then, I'm a fair bit taller than you and if you need a foamectomy for head room, I'm done. :(

curly

iTrader: (25)

Head room to the hard top, not the roll bar. I said I needed a foamectomy for headroom, aka: not for roll bar visibility. The roll bar should not be above your head.

blaen99

iTrader: (6)

Ah, no problems with the "Broomstick" then?

(Edit) Hard dog hard core double diagonal is the same price as the clearview :( Well, there goes that option.

RussellT94

iTrader: (3)

I had a Hard Core Hardtop in my NA. I now have a NB, and will order a Clear View Maxx in the near future. I prefer more room between the back of my head and the roll bar this time around.

I'm 6ft, and a long torso, so I will need to lower the seat regardless of the roll bar height.

blaen99

iTrader: (6)

Thanks Russell, sounds like the Clearview Maxx is in my future.

hustler

iTrader: (6)

I like single diagonals and don't understand why people complain about the "rear view".

How tall is that Boss Frog bar? I want to get a taller roll bar, but with a single diagonal if possible.

curly

iTrader: (25)

You're talking about two different issues: rear view visibility and head room.

rear view visibility shouldn't be taken into consideration, they're all fine for daily driving. I have limited experience, so people with different opinions can chime in, but I'm saying double diagonal is fine, and Hustler is saying single diagonal is fine, should be good enough.

The broom stick test on the other hand, is harder to pass. Very few people will pass with the stock seat, much less with a helmet on. At 5'10" I required a racing seat bolted to the floor in order to barely pass with my helmet on.

If there's a taller bar, buy it.

RussellT94

iTrader: (3)

If you're after the tallest rollbar, I think the AutoPower Race is it. http://www.good-win-racing.com/Mazda...t/30-1038.html

Miater

Some measurements from floor pan to roll bar might help.

I have an Autopower street(freebie) and I'm 6'2"ish. There's no way I'd fit with a helmet on. Still using a stock seat for now. I've got long legs and arms thanks god. Better seat comming so, no race car yet.

blaen99

iTrader: (6)

You guys are starting to talk me into just fabricating a rollbar at this point....

Mobius

iTrader: (2)

I have the Hard Dog M2 Hardcore Sport Double Diagonal. 6'2, 34" inseam. I haven't had issues with tech with the hardtop on; haven't tried any events without the hardtop. My seat has a foamectomy which I recently revisited to remove more foam.

With the hardtop on, rear visibility is impaired somewhat. But you get used to it and work around it without noticing it. With the top down it's not an issue.

chokeasphyxia

iTrader: (8)

Semi thread-jack: Does anyone use the boss frog seat belt adapters? Helpful? Big difference? Seen here:

Fireindc

iTrader: (13)

I'm in the market for a rollbar right now as well. Since were on the subject, would anyone mind telling me the definitive roll bar for a tall guy running a hardtop? I don't care if the stock hardtop latches work or not, i just want to know which one is the tallest, will fit a hardtop, and sits far enough back as to not be slamming my head on it on the streets.

That might be too much to ask. For reference i was looking at the HDHCHTDD or something similar.

blaen99

iTrader: (6)

The reason I'm interested in the Clearview Maxx is because of all the premade bars that have the potential to fit a hardtop, it's supposed to be the best in all of those categories Fire. Although it does block latches and whatnot.

Fireindc

iTrader: (13)

Yeah the latches thing doesn't bother me too much. My hardtop is on 90% of the time - and i don't see an issue with having to undo a few brackets when i want to pull it off.

Although either way I want to eventually go with a racing seat bolted to the floor and harnesses - so i guess it shouldn't matter TOO much. I'm just a pinch over 6' tall, and the car is mostly used on the streets for winding canyons and DD status.

UrbanSoot

iTrader: (24)

Talk to moti at blackbird fab, he can make you any roll bar you want. I'm waiting for mine right now.