Something New...
08-23-2007, 03:18 AM
#1
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
Something New...
Just because I don't have a/c, I decided to try these out until I actually get around to installing my a/c system. Got them from OKMiata, which is a great company to deal with.
They work really well, lots of fresh, cool air enters, then, if the top is up or hard top is on, and you crack the window, even more air rushes at you, but nothing rough. Best of all, even when washing the car, they didn't leak.
They work really well, lots of fresh, cool air enters, then, if the top is up or hard top is on, and you crack the window, even more air rushes at you, but nothing rough. Best of all, even when washing the car, they didn't leak.
Reply
0
0
08-23-2007, 02:23 PM
#4
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
No cutting required. The hardest part was taking the door apart to get it in there, and that's not really hard, just time consuming.
It comes as a lexan piece, precut, and includes the circular vent.
Costs $40 per side plus shipping, my total was just under $90.
I may be up in Roswell at Andretti SpeedLab on Saturday, but if it's raining like they say it's going to, the only testing we'd get to do is to see how watertight they are.
It comes as a lexan piece, precut, and includes the circular vent.
Costs $40 per side plus shipping, my total was just under $90.
I may be up in Roswell at Andretti SpeedLab on Saturday, but if it's raining like they say it's going to, the only testing we'd get to do is to see how watertight they are.
Reply
0
0
08-24-2007, 02:42 AM
#5
Senior Member
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
No cutting required. The hardest part was taking the door apart to get it in there, and that's not really hard, just time consuming.
It comes as a lexan piece, precut, and includes the circular vent.
Costs $40 per side plus shipping, my total was just under $90.
I may be up in Roswell at Andretti SpeedLab on Saturday, but if it's raining like they say it's going to, the only testing we'd get to do is to see how watertight they are.
It comes as a lexan piece, precut, and includes the circular vent.
Costs $40 per side plus shipping, my total was just under $90.
I may be up in Roswell at Andretti SpeedLab on Saturday, but if it's raining like they say it's going to, the only testing we'd get to do is to see how watertight they are.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
davzway
Engine Performance
7
11-27-2013 03:27 PM
