1.8 lower injector seal thickness?
06-08-2009, 05:29 PM
#1
Junior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2006
Location: Binghamton, NY
Posts: 448
Total Cats: 1
1.8 lower injector seal thickness?
So one of my injectors is leaking from the lower seal. They're RX-7 low-z injectors which have a wider pintle cap than the Miata injectors do. I'm currently using the RX-7 lower seals, but need to fix the leak.
I'm pretty well done fabbing a new set that will use standard o-rings to seal the injectors to the head, but don't want to pull my injectors out to measure the thickness of the lower seal if I don't have to. Anyone happen to have one lying around they can measure for me?
--Alex
I'm pretty well done fabbing a new set that will use standard o-rings to seal the injectors to the head, but don't want to pull my injectors out to measure the thickness of the lower seal if I don't have to. Anyone happen to have one lying around they can measure for me?
--Alex
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
