JasonC SBB

.. other than the Toyobaru, which also has port injectors?

darkcambria

iTrader: (2)

As in factory NA or factor turbo? The mazdaspeed3s have enough headroom to swap turbos. They don't have any higher flow injectors so the really high HP guys use port injection as well as DI.

pdexta

iTrader: (17)

I've seen some 700+hp bmw 335s. They must have figured something out, but I know injectors are the limiting factor in most bolton cars so it must be expensive to upgrade the fuel system.

Voltwings

Number of cylinders helps too. 600 whp in a 4 cylinder means each cylinder needs 150 whp worth of fuel, in a 6 cylinder it only needs 100 so the injectors go further.

18psi

iTrader: (76)

I love vague/lazy threads that provide no info or background whatsoever.

Sparetire

The N54/N55 engines basically tune themselves to a large extent when you add in water/meth. That lets you get away with running leaner and adds fuel itself. Not a cheap engine, so they better have full confidence in their water/meth injection setups. I guess the fancy ECU is some insurance though.

E-Cool is the answer.

JasonC SBB

I was wondering how hard it will be for the aftermarket to develop F/I for the ND. So:

1) What NA DI motors have F/I kits, which don't have port injectors from the factory?
2) Any SkyActiv motors with F/I or turbo kits?
3) Seems to me because SkyActiv relies on the "bag of snakes" header for proper scavenging to achieve the high compression ratio, a trubo would be trouble.

Thoughts?

18psi

iTrader: (76)

Much better questions, thank you. Can't think of anything that does what you're asking, you might be onto something new here (or just too new)

JasonC SBB

I wrote the orig post from my phone.

NiklasFalk

iTrader: (1)

Really long tube turbo header?