RicanmiataRacer

I sanded my hollowspokes and had at them with 3 coats of duplicolor gunmetal paint and 3 coats of duplicolor protective clear coat here they are!
I think im in love!

wheel numba 1!


before and after!


And wheel numba 2 !



13.49 for the DIY paint job, paint and sandpaper!
cheers!

NAshowdown95

iTrader: (-2)

def creative! hahaha not bad dude mount em

RicanmiataRacer

Ha HA I figured since I didnt haft to work all day Id do somthing nice and productive lol

Braineack

iTrader: (62)

looks good! now you've joined the club:

Atlanta93LE

iTrader: (5)

I like that look a lot. You have traction troubles with power on those narrow stock sizes?

RicanmiataRacer

Lol All I need now is a hardtop and lip spoiler and I'll be riding like braineack, oh of course my Diy kit done and over with lol

cjernigan

iTrader: (13)

Wheel looks good in comparison man, nice work.

What else are you needing for this build man?

RicanmiataRacer

All I need is couplers, down pipe,finish my Ic piping,install fuel pump,fmu and find a 2 bar map sensor,......I think Im missing Somthing ...I have no clue lol oh yea tires for my wheels

Savington

iTrader: (31)

So eager to paint them you didn't even remove them from the boxes. Hahaha.

Nice paintjob. Good to see my old wheels went to a good home.

akaryrye

iTrader: (5)

Rican, looks really good!

Scott (braineack): When you go to the track what tires are you using? I cant tell in that picture if those are RA-1, Azeni's or slicks? I got the Azeni's and they dont grip enough for me at the Autocross right now, im sliding all over the place.

Braineack

iTrader: (62)

Azenis RT-215s 195/60/14, I have no traction problems. Going with hankook RS2s or Azenis RT-615s in 205/50/15 this season.

I have no suspension pretty much dialed in to how i like it, 7/8" front bar, stock rear bar, FM springs, Konis on 1 3/4 turn front and 1 1/2 turn back.

-1.5* F - 2.0* R

My turbo also spools a tad late, so I dont have power spikes untill I'm exiting corners :gay:

getsidewaysd1

Nice job Rican

VRTSid

make sure you tell the tire shop you painted the rims and would like to keep it clean before you get tires mounted. otherwise they will shred that ****.

happened to me.

akaryrye

iTrader: (5)

ok, i still need to dial in the suspension more myself. The Tein basics made my car tend to oversteer which was a blast to drive but it slowed me down. For next week ill try a stiffer swaybarsetting and I would like to get a realignment that is less agressive in the front like 0toe and 1*camber and leave the rear at 2* with toe in. I bet the azenis will work better then.

MadMonkey

I painted wheels for local car guys for a while. Usually I would hit their brake calipers while I was at it too.

Best ones: Refinished my stock BBS wheels in black with a polished lip, red calipers.

2002 Camaro Z28 (red). Wheels painted all black, red calipers (looked AWESOME and mean!)

Previous gen Mustang convertible, yellow and white. Painted wheels white and calipers metallic yellow. Looked great!

1986 (I think) BMW E-30. Friends wheels were getting ragged so I blasted them with silver and clearcoat. Everybody he showed them to was asking when he got new wheels, he responded by telling them he sent them back to BMW for refinishing. Funny thing was that they believed him....

All of them I used Duplicolor with clear except the Stang, used Rustoleum on those. Worked well somehow...

Miata-Gokart

very nice looks great!

hustler

iTrader: (6)

my hawk hp+ pads stained the paint on my wheels...but I'll just redo them.

MX_Eva

I also painted my wheels myself! Only I have the older style. Gold bishes!



on the car

Racer46

Did mine in gold also:

Efini~FC3S

iTrader: (4)

I might have to do this, the gold is looking really good.